THE DABS CALIBRATION PERFORMANCE MONITORING EQUIPMENT

The Discrete Address Beacon System (DABS) Calibration Performance Monitor Equipment (CPME) is a special DABS transponder designed for installation at a fixed site visible to one or more DABS beacon sensors. The CPME is required for DABS sensor monopulse accuracy tests and for calibration of the sensor off-boresite azimuth look-up table. In addition, the CPME provides tests for DABS link integrity, by storing an uplink message and parroting it back upon command from the sensor. This document contains all information necessary to obtain a general understanding of the CPME system and its operation. Detailed information necessary for repair of the equipment is not contained in this document, but is supplied with each CPME system. (Author)

  • Supplemental Notes:
    • Report on Discrete Address Beacon System.
  • Corporate Authors:

    Lincoln Laboratory

    Massachusetts Institute of Technology
    Lexington, MA  USA  02173

    Federal Aviation Administration

    Systems R&D Service, 800 Independence Avenue, SW
    ,   USA 
  • Authors:
    • Anderson, J C
  • Publication Date: 1979-3-23

Media Info

  • Pagination: 54 p.

Subject/Index Terms

Filing Info

  • Accession Number: 00198172
  • Record Type: Publication
  • Source Agency: National Technical Information Service
  • Report/Paper Numbers: FAA-RD-78-151 Proj Rpt., ATC-89
  • Contract Numbers: F19628-78-C-002, DOT-FA72-WAI-261
  • Files: NTIS, TRIS, USDOT
  • Created Date: Sep 15 1980 12:00AM