ARTICULATED VEHICLE ROLL STABILITY: METHODS OF ASSESSMENT AND EFFECTS OF VEHICLE CHARACTERISTICS

Nine high laden articulated vehicle combinations from 32 tonnes (Mg) to 45 tonnes (Mg) gross train weight were driven into a roll over condition on different manoeuvres to assess their stability in roll and the effect of different vehicle characteristics. The vehicles were also tilted sideways on a platform to the point of balance. Roll over occurred at lateral accelerations from about 0.2g. Trailer roll was the governing factor in the over-turning of the combinations tested. Increased spring stiffness, spring base width and coupling stiffness increased the trailer roll resistance. Measurements demonstrated that the tilt method gave a good indication of roll stability. Calculated results from a computer program of lateral acceleration required for roll over differed from the dynamic results by 10 to 40 percent. Roll over occurs in 3-4 percent of heavy goods vehicle injury accidents. A higher percentage of articulated vehicles roll over than rigid vehicles. Reasons for this are considered to be geometric layout, lack of driver awareness of the total roll of an articulated combination and a tendency for a rigid vehicle to become self stabilising due to loss of drive in roll. Multiple turn manoeuvres did not increase the risk of roll over. A roll over warning device could be useful. /Author/

  • Corporate Authors:

    Transport and Road Research Laboratory

    Old Wokingham Road
    Crowthorne RG11 6AU, Berkshire,   England 
  • Authors:
    • KEMP, R N
    • CHINN, B P
    • Brock, G
  • Publication Date: 1978

Media Info

  • Features: Figures; Photos; Tables;
  • Pagination: 26 p.

Subject/Index Terms

Filing Info

  • Accession Number: 00178339
  • Record Type: Publication
  • Report/Paper Numbers: TRRL Lab Report 788
  • Files: TRIS, ATRI
  • Created Date: Jul 29 1978 12:00AM