LOADS AND VIBRATIONS CAUSED BY EIGHT COMMERCIAL VEHICLES WITH GROSS WEIGHTS EXCEEDING 32 TONS (32.5 MG)

The effect of vehicle weight on dynamic loading and vibrations in road structures is examined for eight commercial vehicles with gross weights in the range 32 to 44 tons (32.5 to 44.7 mg). In general there was no obvious relationship between gross vehicle weight and dynamic loading or vibrations, but this may have been obscured by the influence of other vehicle parameters. A comparison of two vehicles having similar structural characteristics showed a slight increase in these quantities with increasing weight. This was insufficient evidence for a generalisation to be made. The dynamic behaviour of individual suspension systems proved to have the most influence on loading and vibrations. The mechanical coupling of some double axled systems gave rise to repeated cycles of loading. Theoretical work shows that this damaging situation can be controlled by suitable suspension design. The test showed that vehicles with gross weights as high as 44 tons (44.7 mg) need not generate larger dynamic loads or vibrations than are produced by some existing 32 ton (32.5 mg) vehicles. They also showed that dynamic effects due to some current vehicles could be reduced below their present levels. /Author/TRRL/

  • Corporate Authors:

    Transport and Road Research Laboratory (TRRL)

    Wokingham, Berkshire  United Kingdom 
  • Authors:
    • LEONARD, D R
    • Grainger, J W
    • EYRE, R
  • Publication Date: 1974

Media Info

  • Features: Figures; References; Tables;
  • Pagination: 33 p.

Subject/Index Terms

Filing Info

  • Accession Number: 00097018
  • Record Type: Publication
  • Source Agency: Transport and Road Research Laboratory (TRRL)
  • Report/Paper Numbers: No. 582 Lab Rpt.
  • Files: ITRD, TRIS
  • Created Date: Nov 5 1975 12:00AM