Elastomeric Component Fatigue Analysis: Rubber Fatigue Prediction and Correlation Comparing Crack Initiation and Crack Growth Methodologies

Many elastomeric components in automotive industry applications are subjected to dynamic service loads. Fatigue must be a consideration in the design of these components. The two approaches in rubber fatigue analysis discussed in this study are the conventional crack initiation approach, based on continuum mechanics parameters versus life, and the crack growth approach, based on fracture mechanics parameters. These methodologies are demonstrated for a passenger vehicle engine mount here. Temperature effects are not considered since testing was performed at ambient room temperature and with a low frequency, typically less than 5 Hz. The promising methodology for fatigue life prediction, discussed in this paper, is a critical plane approach based on crack energy density. Rainflow cycle counting method and Miner’s damage rule are used for load cycle characterization and damage accumulation respectively. A fracture mechanics approach is implemented based on specimen crack growth data. This methodology is validated with component testing under constant amplitude experiments. Results are investigated through analysis of critical stress locations hot spots, life values, and strain states. Comparative results are presented. Numerical results show reasonable correlation with experimental data.

Language

  • English

Media Info

  • Media Type: Web
  • Features: References;
  • Pagination: pp 1754-1763
  • Serial:

Subject/Index Terms

Filing Info

  • Accession Number: 01738518
  • Record Type: Publication
  • Source Agency: SAE International
  • Report/Paper Numbers: 2020-01-0193
  • Files: TRIS, SAE
  • Created Date: Apr 23 2020 3:13PM