Study of Temperature Distribution and Parametric Optimization during FSW of AA6082 Using Statistical Approaches

n this article, Al-Mg-Si-Mn alloy (AA6082) is butt joined by employing friction stir welding (FSW). The mechanical and metallurgical properties of joints are analyzed by conducting tensile and microhardness testing, respectively. To measure the temperature at different locations, eight thermocouples (L-shaped k-type) are placed at equal distance from the centerline. Least square method attempts to calculate the temperature at the centerline of joints. The process parameters are also optimized using Taguchi’s five-level experimental design. The optimum process parameters are determined, employing ultimate tensile strength (UTS) as a response parameter. A statistical test “analysis of variance” is used to check the adequacy of the model. It has been observed that rotational speed and feed rate are the predominant factors for UTS and microhardness. Optical microscopic and electron backscatter diffraction analyses are carried out to obtain the macrostructure and microstructure of joints.

Language

  • English

Media Info

Subject/Index Terms

Filing Info

  • Accession Number: 01699908
  • Record Type: Publication
  • Source Agency: SAE International
  • Report/Paper Numbers: 05-12-01-0005
  • Files: TRIS, SAE
  • Created Date: Feb 25 2019 2:36PM