Modeling Ignition and Combustion in Spark-Ignition Engines Based on Swept-Volume Method

A swept-volume method of calculating the volume swept by the flame during each time step is developed and used to improve the calculation of fuel reaction rates. The improved reaction rates have been applied to the ignition model and coupled with the level set G-equation combustion model. In the ignition model, a single initial kernel is formed after which the kernel is convected by the gas flow and its growth rate is determined by the flame speed and thermal expansion due to the energy transfer from the electrical circuit. The predicted ignition kernel size was compared with the available experimental data and good agreements were achieved. Once the ignition kernel reaches a size when the fully turbulent flame is developed, the G-equation model is switched on to track the mean turbulent flame front propagation. Moreover, the models were also applied to a homogeneous propane-fueled TCC3 engine and compared with the model whose reaction rate calculations are not based on the swept-volume algorithm. Better agreements with experimental cylinder pressure and heat release rate were obtained compared with the model without coupling with the swept-volume algorithm. The models were implemented and tested in the open source software OpenFOAM.

Language

  • English

Media Info

Subject/Index Terms

Filing Info

  • Accession Number: 01689787
  • Record Type: Publication
  • Source Agency: SAE International
  • Report/Paper Numbers: 2018-01-0188
  • Files: TRIS, SAE
  • Created Date: Oct 8 2018 12:28PM