Nondynamic repeated load tests were conducted on single von Arx in "Impedance Function of a Group of Vertical (0.75-in.) diam pile was instrumented to measure the distribution of axial loads along the shaft. It was found that the response of the pile to repeated loads is governed by the: (1) Type of load; (2) amplitude of load; and (3) number of cycles of load applied. The effect of repeated loading was to bring about not only large changes in the net movement per cycle, but also a redistribution of loads between the shaft and the base. In general, the pile behavior is marked by two or three stages of relative stability or instability in terms of the net movement per cycle. The response of the pile to a small repeated load is characterized by a long and highly stable stage which, in some cases, is followed by an unstable stage. (ASCE) not failed, yet some movements that occurred in the tank

Media Info

Subject/Index Terms

Filing Info

  • Accession Number: 00310716
  • Record Type: Publication
  • Report/Paper Numbers: ASCE 15222
  • Files: TRIS
  • Created Date: Oct 8 1980 12:00AM