Track loading limits and cross-acceptance of vehicle approvals
The requirements for track loading limits are one of the main barriers to simple cross-acceptance of vehicles where rolling stock that is already operating successfully in one (or more) networks has to be retested before it can be approved for operation on another network. DynoTRAIN Work Package 4 studied this area in order to determine whether the additional requirements were justified, or if the process could be made much cheaper and simpler without increasing the risk of track deterioration for the networks. The review of national requirements identified modified criteria and limit values for track forces in some member states; however, these can be obtained from additional analysis of the normal test results with no new tests required. The influence of design rail inclination has also been found not to be significant, provided a realistic range of wheel–rail contact conditions are included in the tests. For line speeds greater than or equal to 160?km/h, the current standards for track construction across the member states appear to be similar. On lower speed lines in some countries, a ‘weaker’ track condition may require a lower limit on one of the vehicle assessment parameters. Track dynamics modelling has shown that the vehicle assessment parameters used in international standards are suitable for use in cross-acceptance for track forces. The use of multiple regression analysis allows the estimated maximum value for relevant parameters to be evaluated for different target conditions and then compared with the appropriate limit value, or with values for existing, comparable vehicles. Guidance has also been provided on the relevant parameters to consider when developing operating controls for different types of track deterioration.
- Record URL:
- Record URL:
-
Availability:
- Find a library where document is available. Order URL: http://worldcat.org/issn/09544097
-
Supplemental Notes:
- Reprinted by permission of Sage Publications, Ltd.
-
Authors:
- Eickhoff, Bridget
- Mazzola, Laura
- Bezin, Yann
- Tucker, Gareth
- Stradtmann, Hinnerk
- Haigermoser, Andreas
- Chollet, Hugues
- Landais, Jeremy
- Publication Date: 2015-8
Language
- English
Media Info
- Media Type: Digital/other
- Features: Figures; References; Tables;
- Pagination: pp 710-728
-
Serial:
- Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
- Volume: 229
- Issue Number: 6
- Publisher: Sage Publications Limited
- ISSN: 0954-4097
- EISSN: 2041-3017
- Serial URL: http://pif.sagepub.com/content/current
Subject/Index Terms
- TRT Terms: Certification; Mechanical loads; Rolling stock; Simulation; Testing; Train track dynamics
- Identifier Terms: DynoTrain project
- Subject Areas: Design; Railroads; Vehicles and Equipment; I91: Vehicle Design and Safety;
Filing Info
- Accession Number: 01573920
- Record Type: Publication
- Files: TRIS
- Created Date: Aug 27 2015 11:25AM