Analytical Modeling of the Interface between Lightly Roughened Hollowcore Slabs and Cast-In-Place Concrete Topping
Hollowcore slabs are commonly used in different types of structures. They usually include a 50-mm concrete topping. Structural engineers can use this topping to increase the slab load-carrying capacity. North American design standards relate the horizontal shear strength at the interface between hollowcore slabs and the concrete topping to the slab surface roughness. This paper presents the results of four push-off tests on hollowcore slabs supplied by two manufacturers and roughened using a conventional steel broom. The tested slabs sustained higher horizontal shear stresses than those specified by the design standards. Utilizing the data from the push-off tests, an analytical model was applied to evaluate the shear and peel stiffnesses, ks and kp, of the interface between hollowcore slabs and concrete topping. Structural engineers can utilize ks and kp values to model the composite action between hollowcore slabs from the two manufacturers and concrete topping. The analytical model was also used to evaluate the actual distribution of shear and peel stresses.
- Record URL:
- Find a library where document is available. Order URL: http://worldcat.org/issn/07339445
- © 2014 American Society of Civil Engineers.
- Adawi, Aiham
- Youssef, Maged A.
- Meshaly, Mohamed
- Publication Date: 2015-4
- Media Type: Web
- Features: References;
- Pagination: 04014119
- TRT Terms: Cast in place concrete; Shear stress; Slabs; Stiffness; Structural analysis
- Uncontrolled Terms: Push-off tests
- Subject Areas: Bridges and other structures; Design; Highways; I20: Design and Planning of Transport Infrastructure;
- Accession Number: 01532487
- Record Type: Publication
- Files: TRIS, ASCE
- Created Date: Jul 9 2014 3:03PM