STRENGTH OF A MODEL OF JOINTED ROCK

IN AN ATTEMPT TO EXTEND THE PRESENTLY LIMITED STATE OF KNOWLEDGE OF THE STRENGTH OF JOINTED ROCK MASSES, TRIAXIAL COMPRESSION TESTS WERE CARRIED OUT ON IDEALIZED SAMPLES CONTAINING SETS OF PREFORMED DISCONTINUITIES INCLINED AT VARIOUS ANGLES TO THE SAMPLE AXES. THE 4 IN. BY 8 IN. SAMPLES WERE BUILT UP FROM ONE IN. CUBES OF A HIGH STRENGTH GYPSUM PLASTER. TRIAXIAL TESTS WERE CARRIED OUT ON 5 SAMPLE TYPES AT EACH OF 5 CONFINING PRESSURES IN THE RANGE 0 TO 2000 PSI. THE FOUR MAJOR MODES OF FAILURE WERE: (1) AXIAL CLEAVAGE FRACTURES AT LOW CONFINING PRESSURES, (2) SHEAR FAILURE THROUGH THE PLASTER AND ACROSS JOINT PLANES, (3) SLIP ON JOINT PLANES, AND (4) DUCTILE FAILURE. THE STRENGTHS OF BLOCK-JOINTED SAMPLES FAILING BY MODE (2) WERE LESS THAN THOSE OF THE CORRESPONDING UNJOINTED SAMPLES. AT THE HIGHER CONFINING PRESSURES OF MODE (4), THE STRENGTHS WERE HIGHER THAN THOSE OF THE UNJOINTED SAMPLES AND WERE UNAFFECTED BY JOINT ORIENTATION. FRACTION PARAMETERS DETERMINED FROM TESTS IN WHICH MODE (3) APPLIED WERE THE SAME AS THOSE DETERMINED FOR THE PLASTER IN DIRECT SHEAR TESTS. MOHR'S CIRCLE ENVELOPES WERE CURVED, AND COULD BE DESCRIBED BY A POWER LAW IN WHICH THE NORMAL STRESS INDEX VARIED WITH JOINT ORIENTATION. /ASCE/

  • Supplemental Notes:
    • Vol 96, No SM2, PROC PAPER 7185, PP 685-704, 9 FIG, 5 TAB,
  • Authors:
    • Brown, E T
    • Trollope, D H
  • Publication Date: 1970-3

Media Info

Subject/Index Terms

Filing Info

  • Accession Number: 00236003
  • Record Type: Publication
  • Files: TRIS
  • Created Date: Aug 1 1971 12:00AM