THE RELATION BETWEEN THE FRICTION AND VISCOELASTIC PROPERTIES OF RUBBER

A STUDY OF THE FRICTION OF SEVERAL TYPES OF RUBBER AGAINST HARD SURFACES OVER A WIDE RANGE OF TEMPERATURES AND SLIDING VELOCITIES IS DESCRIBED. THE HIGHEST VELOCITY DID NOT EXCEED A FEW CENTIMETERS PER SECOND SO THAT FRICTIONAL HEATING WAS NEGLIGIBLE. THE RESULTS SHOW THAT THE FRICTION INCREASES WITH THE SLIDING VELOCITY TO A MAXIMUM VALUE AND THEN FALLS. THE APPLICATION OF THE WILLIAMS, LANDEL & FERRY (1955) TRANSFORM SHOWS THAT THE FRICTIONAL BEHAVIOR OF A RUBBER SLIDING AT VARIOUS VELOCITIES AND TEMPERATURES ON A GIVEN SURFACE CAN ENTIRELY BE DESCRIBED BY A SINGLE MASTER CURVE AND THE GLASS TRANSITION TEMPERATURE OF THE MATERIAL. THE MASTER CURVE ON A ROUGH ABRASIVE TRACK SHOWS, IN GENERAL, TWO PEAKS--ONE OF THESE OCCURS AT A VELOCITY RELATED TO THE FREQUENCY WITH WHICH THE TRACK ASPERITIES DEFORM THE RUBBER SURFACE. THIS MAXIMUM IS ABSENT ON A SMOOTH TRACK AND THUS REFLECTS THE DEFORMATION LOSSES PRODUCED BY THE PASSAGE OF THE ASPERITIES OVER THE RUBBER SURFACE. THE OTHER PEAK OCCURS IN GENERAL AT MUCH LOWER VELOCITIES. IT COINCIDES IN POSITION WITH THE SINGLE MAXIMUM OBTAINED ON A SMOOTH SURFACE. INTRODUCTION OF A FINE POWDER (MAGNESIUM OXIDE) INTO THE INTERFACE BETWEEN THE RUBBER AND TRACK ELIMINATES THIS PEAK ON BOTH SMOOTH AND ROUGH SURFACES, THEREFORE, IT IS ATTRIBUTED TO MOLECULAR ADHESION. COMPARISON WITH THE RELAXATION SPECTRUM OF THE RUBBER GIVES A FUNDAMENTAL JUMP DISTANCE OF THE ORDER OF 60 ANGSTROM. IT APPEARS THEREFORE, THAT FRICTION ARISES FROM ADHESION AND DEFORMATION LOSSES, AND THAT BOTH ARE DIRECTLY RELATED TO THE VISCO-ELASTIC PROPERTIES OF THE RUBBER. /AUTHOR/

  • Supplemental Notes:
    • Vol A274, pP 21-39, 14 FIG, 3 TAB, 24 REF, 1 APP
  • Corporate Authors:

    Royal Society of London Proceedings /UK

    ,    
  • Authors:
    • GROSCH, K A
  • Publication Date: 1963-8-13

Subject/Index Terms

Filing Info

  • Accession Number: 00216468
  • Record Type: Publication
  • Files: TRIS
  • Created Date: Jul 15 1994 12:00AM