<rss version="2.0" xmlns:atom="https://www.w3.org/2005/Atom">
  <channel>
    <title>Transport Research International Documentation (TRID)</title>
    <link>https://trid.trb.org/</link>
    <atom:link href="https://trid.trb.org/common/TRIS Suite/feeds/RSS.aspx?s=PHNlYXJjaD48cGFyYW1zPjxwYXJhbSBuYW1lPSJzdWJqZWN0bG9naWMiIHZhbHVlPSJvciIgLz48cGFyYW0gbmFtZT0idGVybXNsb2dpYyIgdmFsdWU9Im9yIiAvPjxwYXJhbSBuYW1lPSJsb2NhdGlvbiIgdmFsdWU9IjAiIC8%2BPC9wYXJhbXM%2BPGZpbHRlcnM%2BPGZpbHRlciBmaWVsZD0ic2VyaWFsIiB2YWx1ZT0iJnF1b3Q7Q2VtZW50LCBDb25jcmV0ZSBhbmQgQWdncmVnYXRlcyZxdW90OyIgb3JpZ2luYWxfdmFsdWU9IiZxdW90O0NlbWVudCwgQ29uY3JldGUgYW5kIEFnZ3JlZ2F0ZXMmcXVvdDsiIC8%2BPC9maWx0ZXJzPjxyYW5nZXMgLz48c29ydHM%2BPHNvcnQgZmllbGQ9InB1Ymxpc2hlZCIgb3JkZXI9ImRlc2MiIC8%2BPC9zb3J0cz48cGVyc2lzdHM%2BPHBlcnNpc3QgbmFtZT0icmFuZ2V0eXBlIiB2YWx1ZT0icHVibGlzaGVkZGF0ZSIgLz48L3BlcnNpc3RzPjwvc2VhcmNoPg%3D%3D" rel="self" type="application/rss+xml" />
    <description></description>
    <language>en-us</language>
    <copyright>Copyright © 2026. National Academy of Sciences. All rights reserved.</copyright>
    <docs>http://blogs.law.harvard.edu/tech/rss</docs>
    <managingEditor>tris-trb@nas.edu (Bill McLeod)</managingEditor>
    <webMaster>tris-trb@nas.edu (Bill McLeod)</webMaster>
    <image>
      <title>Transport Research International Documentation (TRID)</title>
      <url>https://trid.trb.org/Images/PageHeader-wTitle.jpg</url>
      <link>https://trid.trb.org/</link>
    </image>
    <item>
      <title>Multi-laboratory study of the accelerated mortar bar test (ASTM C 1260) for alkali-silica reaction</title>
      <link>https://trid.trb.org/View/1162500</link>
      <description><![CDATA[]]></description>
      <pubDate>Thu, 23 Aug 2012 11:59:27 GMT</pubDate>
      <guid>https://trid.trb.org/View/1162500</guid>
    </item>
    <item>
      <title>A DEVICE FOR STUDYING FRESH CONCRETE FRICTION</title>
      <link>https://trid.trb.org/View/750142</link>
      <description><![CDATA[Many civil engineering applications are confronted with problems caused by friction (wear, head losses, etc.).  A tribometer for fluid material was therefore developed to measure friction between concrete and a solid surface.  The principle consists in pressing fresh concrete samples against a moving metal surface and measuring the tangential force.  In this article, the validation of this new instrumentation is presented.  The authors focus on the case of formwork filling with concrete, examining contact pressure and sliding velocity.  The authors note that, beyond a critical pressure which depends on the type of concrete, the homogeneous liquid phase in contact with the plate can move to the lower stressed interior region of the sample.  The interface will then have an almost granular behavior, as if no boundary layer were present.  Results obtained on two concretes show that the friction does not follow Coulomb's Law.]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750142</guid>
    </item>
    <item>
      <title>EFFECT OF NON-UNIFORM STRAINING IN CONCRETE COMPRESSIVE STRENGTH TESTS</title>
      <link>https://trid.trb.org/View/750143</link>
      <description><![CDATA[If a concrete specimen is tested to failure in compression and the machine allows the longitudinal strain in the specimen to be non-uniform over the cross-section of the specimen at its maximum load, then that load is lower than it would be if the strains were uniform. This article reports on an experimental study on the magnitude of the effect of non-uniform straining on apparent concrete strength, showing how it varies for low, medium, and high strength concrete.  Measurements of distance between the loading platens of a compression testing machine can be used to determine the extent to which it non-uniformly strains its specimens.  Simple theoretical modeling is shown to reproduce the measured results well.  The authors note that the correlation between the theory presented and the test measurements is better for normal strength concrete than for high strength concrete.  The authors conclude that the effect of non-uniform straining on a concrete specimen's strength can be either prevented by manufacturing testing machines that are adequately stiff in response to an eccentric reaction from the specimen; or compensated for, after measuring strains during the test.]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750143</guid>
    </item>
    <item>
      <title>A NEW METHOD FOR EVALUATING THE RISK OF DEF</title>
      <link>https://trid.trb.org/View/750144</link>
      <description><![CDATA[The premature deterioration of concrete and mortars due to delayed ettringite formation (DEF) is a known problem.  Because many parameters influence DEF and consequent expansion, a reliable, simple, and relatively rapid experimental method to evaluate potential DEF is needed.  In this article, a new method involving a slight acceleration of curing is proposed to evaluate the sensitivity of a particular cement or particular mortars to DEF and consequent expansion.  This method can be used to determine the maximum concrete temperature below which the risk of DEF is minimal and acceptable. After a heat curing, the specimens were kept in lime-saturated water. On the seventh day, they were submitted to six daily thermal cycles (plus 50 to plus 10 deg C).  The results show that expansion is greater when thermal cycles are applied compared to control specimens. Therefore, the absence of expansion of some mortars submitted to thermal cycles enables us to accept the mix, even if the curing temperature is 90 deg C.  This method has been applied successfully in mortar specimens.  However, it is not yet clear if the mortar prism expansion test can lead to a good prediction of the behavior of concrete prisms, and especially to a prediction for real precast or cast-in-place concrete elements.]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750144</guid>
    </item>
    <item>
      <title>INFLUENCE OF SPECIMEN GEOMETRY, ORIENTATION OF CASTING PLANE, AND MODE OF CONCRETE CONSOLIDATION ON EXPANSION DUE TO ASR</title>
      <link>https://trid.trb.org/View/750145</link>
      <description><![CDATA[This article reports on a study in which concrete specimens of different sizes and shapes were made with various reactive aggregates and stored under conditions favorable to the development of alkali-silica reactivity (ASR), with their expansion measured with time along the three directions.  They have been cast vertically (cylinders and prisms) or horizontally (prisms and larger blocks), using a vibrating table, a vibrating needle, or rodding.  The results show that the expansion due to ASR was always greater in the direction perpendicular to the casting plane. The higher the number of flat and elongated particles in the reactive aggregate, the higher the coefficient of anisotropy, defined as the ratio between the expansions perpendicular and parallel to the casting plane.  Consolidation by rodding induced anisotropy coefficients distinctly smaller than consolidation using a vibrating table, while a vibrating needle induced intermediate values; however, all methods gave constant volumetric expansion at least up to an important expansion level.   The authors conclude that, when evaluating field concrete affected by ASR, it appears important to consider the orientation with respect to the casting plane of the core samples subjected to mechanical or residual expansion tests.]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750145</guid>
    </item>
    <item>
      <title>MEASUREMENT OF PARTICLE SIZE DISTRIBUTION IN PORTLAND CEMENT POWDER: ANALYSIS OF ASTM ROUND ROBIN STUDIES</title>
      <link>https://trid.trb.org/View/750146</link>
      <description><![CDATA[A distribution of particle sizes or particle size distribution (PSD) is a fundamental characteristic of cement powder. Accurate PSDs are required in computational efforts to model the hydration process and it is an important practical issue for the cement industry. Presently, the only available standard method for measuring the PSD of cement, namely ASTM C115, is limited in scope, with a lower size detection limit of 7.5 mm. This article reports on two ASTM-sponsored round robin tests that were performed to ascertain the techniques and methods currently used in the cement industry and  to develop and refine a standard method or methods. The results have been incorporated into a best practice method based on the technique of laser diffraction. The authors summarize the findings based on the data generated during the round robins and outline the various approaches available to measure the PSD of cement. A summary of the statistical analysis of the test results is described.]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750146</guid>
    </item>
    <item>
      <title>UNTHERMOSTATED MULTICHANNEL HEAT CONDUCTION CALORIMETER</title>
      <link>https://trid.trb.org/View/750147</link>
      <description><![CDATA[Heat conduction calorimetry is a convenient method to detect cement-admixture incompatibility.  As cement hydrates, heat is produced, and the measurement of this heat is used to monitor and quantify the hydration reaction.  This paper presents the design of a simple unthermostated heat conduction calorimeter that can simultaneously monitor the heat production rate in 14 samples of cement paste or mortar.  As it is not thermostated, its performance is governed by the ambient temperature stability and the heat capacity balance between each sample and its reference. The author shows that the instrument can be used to detect cement-admixture incompatibility and to quantify retardation time.  This paper was presented at a symposium on cement-admixture interactions (December 2003, Tampa, Florida).]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750147</guid>
    </item>
    <item>
      <title>INFLUENCE OF A LONG-TERM RETARDER ON THE HYDRATION OF CLINKER AND CEMENT</title>
      <link>https://trid.trb.org/View/750148</link>
      <description><![CDATA[Long-term retarders are capable of inhibiting the hydration of cement very strongly, i.e., for several days.  They are used as recycling aids for wash water or residual concrete, they facilitate the cleaning of truck mixers and concrete mixers, and they enable the recycling of the wash water or the residual concrete at sites that have no recycling water reservoir.  This paper summarizes the results of investigations on the effects of a long-term retarder (LTR) based on phosphonic acid (PBTC) on the hydration of several clinker phases (C3S, C3A, C4AF), Portland cement clinker, and Portland cement.  The study showed that long-term retardation is due to a thin sparingly soluble layer of calcium phosphonate on the particle surface.  The formation of sparingly soluble calcium phosphonate requires 2.5 moles Ca2+ per mole PBTC.  If enough Ca2+ is available, sparingly soluble calcium phosphonate precipitates and forms a layer around the cement particles, which retards further hydration immediately.  The opposite is also true: a lack of Ca2+ causes a short-term acceleration in hydration of the reactive clinker phase C3A.  The study also shows that controlled long-term retardation can only be achieved if the cement shows an optimal "natural" setting retardation.  This paper was presented at a symposium on cement-admixture interactions (December 2003, Tampa, Florida).]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750148</guid>
    </item>
    <item>
      <title>CEMENT AND SUPERPLASTICIZER COMBINATIONS: COMPATIBILITY AND ROBUSTNESS</title>
      <link>https://trid.trb.org/View/750149</link>
      <description><![CDATA[Modern concrete can contain up to five or more chemical admixtures.  This article reports on a study that investigated the robustness of combinations of cements and superplasticizers. Tests done with various cements and different families of superplasticizers showed that although a combination of a cement and a superplasticizer could be compatible, it is not necessarily robust. Sometimes a little variation in the dosage of the admixture could lead to detrimental side effects, such as segregation, excessive set retardation, or excess air content in the concrete.  Results showed that the chemical composition of the cement is critical to ensure good compatibility and adequate robustness of various combinations of cements and superplasticizers. The chemical nature of the superplasticizer also plays a role in the behavior of such combinations. The C3A content, the soluble (alkali) sulphate content, and the fineness of the cement, which influence the adsorption rate of the superplasticizers on the cement particles, are among the key factors, especially for polysulfonated admixtures.  The authors conclude that a rough prediction of the compatibility and robustness of cements and superplasticizers could be made by analyzing the chemical composition of the cement and the chemical nature of the superplasticizer.  This paper was presented at a symposium on cement-admixture interactions (December 2003, Tampa, Florida).]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750149</guid>
    </item>
    <item>
      <title>POLYCARBOXYLATE POLYMERS AND BLENDS IN DIFFERENT CEMENTS</title>
      <link>https://trid.trb.org/View/750150</link>
      <description><![CDATA[During the last few years, polycarboxylate based polymers have become very popular, especially in self consolidating concrete (SCC). These polymers contain a polycarboxylic backbone onto which ethyleneoxide side chains have been grafted. However its dispersing and slump keeping properties vary significantly, depending on the chemical structure.  This article reports on a study of  the dispersing properties of two polymers having a different number of polyoxyethlene (PEO) graft chains relative to the length of the backbone.  The polymers were evaluated in cement paste by measuring adsorption on cement paste and flow properties in different mortar compositions. The results showed that the effects of the polymers on the fluidity and the retention of flow of the cementitious systems are significantly different. While one polymer gives a very strong initial water reduction, the second one shows excellent flow retaining properties.  The authors conclude that, when combined, the two polymers are well suited for the production of  RMC (ready mixed concrete) and SCC mixes with different cements and in different climate zones.  This paper was presented at a symposium on cement-admixture interactions (December 2003, Tampa, Florida).]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750150</guid>
    </item>
    <item>
      <title>MODELING DRYING SHRINKAGE STRESS GRADIENTS IN CONCRETE</title>
      <link>https://trid.trb.org/View/750151</link>
      <description><![CDATA[Cracking is a problem for the serviceability, durability, and aesthetic quality of concrete structures and pavements.  The potential for drying shrinkage cracking in concrete is related, in part, to the development of a moisture gradient across the cross-section of the concrete element.  This article reports on a model that has been developed that incorporates experimental measurements of internal relative humidity to investigate drying shrinkage stress gradients in concrete specimens. The authors outline the experimental and analytical procedure for using the model.  The authors conclude that initial research involving application of the model has indicated that there is a relationship between drying stress gradient severity and the time to cracking under full restraint.  Further development of the model could involve combination with fracture models to investigate microcrack formation and propagation.]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750151</guid>
    </item>
    <item>
      <title>POTENTIAL FOR RESTRAINED SHRINKAGE CRACKING OF CONCRETE AND MORTAR</title>
      <link>https://trid.trb.org/View/750152</link>
      <description><![CDATA[While actual cracking of concrete and mortar in service depends on many variables (such as type of structure, degree of restraint, construction and curing methods, and environmental factors), a ring test can be used to determine the relative likelihood of early-age cracking of various concrete mixtures or mortars.  However, standard ring test setups have provided qualitative evaluations and have not enabled a simple procedure to be established to routinely quantify the restrained shrinkage characteristics of the materials.  This article reports on a study in which an instrumented ring setup is used to quantify the restrained shrinkage behavior of concrete and mortar.  The setup provides a high degree of restraint while still allowing sufficient strain in the steel as the material shrinks.  This test permits the cracking potential of concrete or mortar under restrained shrinkage to be classified on the basis of either how long it takes the material to crack or the rate of stress development in the material. The authors also report on a simple procedure that was developed for the preliminary assessment of cracking potential using standard values of drying shrinkage and modulus of elasticity obtained at seven days after initiation of drying.]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750152</guid>
    </item>
    <item>
      <title>PRE-SOAKED LIGHTWEIGHT AGGREGATES AS ADDITIVES FOR INTERNAL CURING OF HIGH-STRENGTH CONCRETES</title>
      <link>https://trid.trb.org/View/750153</link>
      <description><![CDATA[Self-desiccation and the resulting autogenous shrinkage of high-strength concretes is one of their drawbacks which cannot be readily accommodated by conventional curing.  Some researchers have proposed a concept of internal curing using lightweight soaked aggregates, to provide internal reservoirs of water which enable uniform curing of the whole cross-section. This article reports on a study undertaken to develop this approach further, by optimizing the porosity and size of the aggregates.  This could enable successful internal curing with only a small amount of aggregates, which could be viewed as additives rather than bulk replacement of conventional aggregates.  The approach taken was to increase the porosity of the aggregates and reduce their size, to obtain a system with numerous internal reservoirs of sufficiently small spacing to allow water to be readily discharged from the aggregate and transported over the whole range of the matrix.  The results show that aggregates with porosities of about 50% by volume, a size of a few millimeters, and contents of less than 50 kg/m3 could provide full elimination of autogenous shrinkage in concretes having water to cement ratios as low as 0.25, with only a small affect on strength.  The effectiveness of the lightweight aggregates was largely dependent on their total porosity, but not on the aggregate spacing.  Higher porosity resulted in greater efficiency.]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750153</guid>
    </item>
    <item>
      <title>NEW RESULTS ON EARLY-AGE CRACKING RISK OF SPECIAL CONCRETE</title>
      <link>https://trid.trb.org/View/750154</link>
      <description><![CDATA[The Center of Building Materials (cbm) at the Technische Universitaet Muenchen has many years of experience in the early-age cracking risk of concrete. This article reports new results on the early-age cracking risk of special concretes, with regard to their specific conditions or composition that is different to that of ordinary mass concrete. These special concretes are self-compacting concrete, pavement concrete, high-strength concrete and ultrahigh-performance concrete (with a compressive strength of up to 200 MPa at an age of 28 days). The authors report a test-based calculation method using the finite element method (FEM) that was developed to predict the thermal restraint stress in concrete structures under various weather and curing conditions.  The authors conclude that the restraint stress distribution at any location in the concrete can be calculated realistically by applying appropriate rheological models.]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750154</guid>
    </item>
    <item>
      <title>CONTROL OF CRACKING IN BRIDGE DECKS: OBSERVATIONS FROM THE FIELD</title>
      <link>https://trid.trb.org/View/750155</link>
      <description><![CDATA[This article reports on crack surveys of bridge decks, that were performed over a 10-year period in northeast Kansas as part of three studies.  These surveys provide strong guidance in identifying the parameters that control cracking in these steel girder bridges (bridges that are generally agreed to exhibit the greatest amount of cracking in the concrete decks). The surveys include monolithic decks and decks with silica fume and conventional concrete overlays. The results show that crack density increases as a function of cement and water content, and concrete strength.  Crack density is higher in the end spans of decks that are integral with the abutments than in decks with pin-ended supports. Most cracking occurs early in the life of a bridge deck, but continues to increase over time. This pattern is true for bridges cast in the 1980s and in the 1990s. However, bridge decks cast in the 1980s exhibit less cracking than those in the 1990s, even with the increase in crack density over time. The authors discuss changes in materials, primarily cement fineness, and construction procedures over the past 20 years. The authors comment on the positive effect of efforts to limit early evaporation, suggesting that the early initiation of curing procedures will help reduce cracking in bridge decks.]]></description>
      <pubDate>Tue, 22 Feb 2005 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/750155</guid>
    </item>
  </channel>
</rss>