<rss version="2.0" xmlns:atom="https://www.w3.org/2005/Atom">
  <channel>
    <title>Transport Research International Documentation (TRID)</title>
    <link>https://trid.trb.org/</link>
    <atom:link href="https://trid.trb.org/common/TRIS Suite/feeds/RSS.aspx?s=PHNlYXJjaD48cGFyYW1zPjxwYXJhbSBuYW1lPSJkYXRlaW4iIHZhbHVlPSJhbGwiIC8%2BPHBhcmFtIG5hbWU9InN1YmplY3Rsb2dpYyIgdmFsdWU9Im9yIiAvPjxwYXJhbSBuYW1lPSJ0ZXJtc2xvZ2ljIiB2YWx1ZT0ib3IiIC8%2BPHBhcmFtIG5hbWU9ImxvY2F0aW9uIiB2YWx1ZT0iMCIgLz48L3BhcmFtcz48ZmlsdGVycz48ZmlsdGVyIGZpZWxkPSJpbmRleHRlcm1zIiB2YWx1ZT0iJnF1b3Q7TW9vcmluZyBjYWJsZXMmcXVvdDsiIG9yaWdpbmFsX3ZhbHVlPSImcXVvdDtNb29yaW5nIGNhYmxlcyZxdW90OyIgLz48L2ZpbHRlcnM%2BPHJhbmdlcyAvPjxzb3J0cz48c29ydCBmaWVsZD0icHVibGlzaGVkIiBvcmRlcj0iZGVzYyIgLz48L3NvcnRzPjxwZXJzaXN0cz48cGVyc2lzdCBuYW1lPSJyYW5nZXR5cGUiIHZhbHVlPSJwdWJsaXNoZWRkYXRlIiAvPjwvcGVyc2lzdHM%2BPC9zZWFyY2g%2B" rel="self" type="application/rss+xml" />
    <description></description>
    <language>en-us</language>
    <copyright>Copyright © 2026. National Academy of Sciences. All rights reserved.</copyright>
    <docs>http://blogs.law.harvard.edu/tech/rss</docs>
    <managingEditor>tris-trb@nas.edu (Bill McLeod)</managingEditor>
    <webMaster>tris-trb@nas.edu (Bill McLeod)</webMaster>
    <image>
      <title>Transport Research International Documentation (TRID)</title>
      <url>https://trid.trb.org/Images/PageHeader-wTitle.jpg</url>
      <link>https://trid.trb.org/</link>
    </image>
    <item>
      <title>Implementation of Smart Hawser and Active Control to Suppress Fishtailing Instability and Snap Load of FPSO-Shuttle Tanker during Tandem Offloading</title>
      <link>https://trid.trb.org/View/2753428</link>
      <description><![CDATA[Fishtailing instability in a Shuttle Tanker (ST) during tandem offloading from a spread-moored Floating Production Storage and Offloading (FPSO) is a critical phenomenon characterized by its large-scale, long-period cyclic sway and yaw motions accompanied by excessive hawser snap loading. This study investigates the stability of the FPSO-ST coupled system by incorporating current forces into their coupled equations of motions. A linearized model was first employed to assess the stability and identify controllable parameters, specifically hawser tension and length. Subsequent nonlinear stability analysis, utilizing phase portraits and fixed-point evaluation, revealed that the ST origin behaves as a marginal center-type fixed point, indicating high sensitivity to perturbations. Numerical simulations were performed in time domain for an FPSO-ST tandem system using in-house multi-body-line coupled-dynamics CHARM3D program under representative operational sea state. Results demonstrate that out-of-phase relative surge motions during system build-up generate significant high tension peak called snap loading. Also, large hawser angles occur indicating fishtailing instability. The high tension peaks and large hawser angle subside as mean hawser tension increases, validating the analytical predictions. Two smart hawser systems - Magnetic-Rheological Elastomer (MRE) and Rigidity-Tuning Composite Elastomer (RCE) Tensioners - were implemented. Utilizing PI (Proportional Integral) and Skyhook control logics to modulate stiffness via variable electrical current, these smart hawser systems successfully mitigated high tension peaks and tensioner strokes within specified safety limits, and reduced fishtailing motions.]]></description>
      <pubDate>Wed, 16 Sep 2026 16:15:37 GMT</pubDate>
      <guid>https://trid.trb.org/View/2753428</guid>
    </item>
    <item>
      <title>Experimental and numerical investigation of transient responses and mooring tensions of SFT induced by sudden mooring failure</title>
      <link>https://trid.trb.org/View/2681710</link>
      <description><![CDATA[This paper examines the transient responses and line tensions of a submerged floating tunnel (SFT) subjected to sudden mooring-failure incidents through experiments and numerical simulations. A 1/100-scale SFT-section model, constructed from acrylic material with 8 mooring lines, was tested in a 2D wave tank based on Froude similarity to evaluate the transient effects of mooring failures. The same system was numerically modeled using lumped masses connected by linear and torsional springs for structural elasticity and the Morison equation for hydrodynamic load calculations. The numerical simulations for various line-failure scenarios were systematically compared with experimental results, demonstrating good agreement. Both approaches indicate that transient tension overshoots immediately after a line failure can be substantial, especially at high buoyancy-to-weight ratios (BWRs). After verifying the transient behaviors, the numerical model was extended to investigate cases with lower BWRs and a more realistic, longer SFT configuration with additional mooring lines. In these cases, transient effects are appreciably reduced, as expected. In the case of longer SFT, the present Morison-force-based result is compared with a much more rigorous discrete module beam (DMB) approach in solving hydroelasticity, including wave diffraction/radiation effects. Furthermore, mooring-line loss results in a nonsymmetric mooring system, leading to more nonlinear SFT dynamics under regular wave conditions.]]></description>
      <pubDate>Thu, 14 May 2026 17:05:12 GMT</pubDate>
      <guid>https://trid.trb.org/View/2681710</guid>
    </item>
    <item>
      <title>Dynamic response analysis of submerged floating tunnels under multi-hazard effects part I: Theory and modeling</title>
      <link>https://trid.trb.org/View/2634077</link>
      <description><![CDATA[As a novel sea-crossing structure, the submerged floating tunnel (SFT) includes tubes of several kilometers and a mooring cable system of several hundred meters, exhibiting significant coupled dynamic effects. A program considering the nonlinear deformation and coupled dynamic behavior of the SFT is developed. This program is based on rigid-flexible multi-body system dynamics (MBSD) using the absolute nodal coordinate formulation (ANCF), including modules for structural analysis, multi-hazard load calculation, and MBSD dynamic response solver. The tube employs fully parameterized ANCF beams to capture all deformation modes. The cable adopts reduced parameterized beams to consider axial and bending deformation. The vehicle is modeled as 6-DOF rigid bodies connected through spring-damper. The spherical joints are utilized between mooring-tube and mooring-seabed, while rigid joints are employed at both ends of the tube. Hydrodynamic forces are calculated by the modified Morison equation and Van der Pol wake oscillator. The seismic action is applied to the ground constraints as a dynamic boundary. The constraint failure is introduced to simulate the cable breakage. The generalized-α method is employed for direct time integration of the MBSD equations. This program can simulate the response of SFT under multi-hazard, providing a basis for design and hazard prevention strategies.]]></description>
      <pubDate>Mon, 27 Apr 2026 15:01:22 GMT</pubDate>
      <guid>https://trid.trb.org/View/2634077</guid>
    </item>
    <item>
      <title>Reference mooring and dynamic cable designs for representative U.S. floating wind farms</title>
      <link>https://trid.trb.org/View/2660769</link>
      <description><![CDATA[The U.S. offshore wind industry will require novel solutions for floating wind turbine mooring systems and power cables to suit the diverse range of U.S. site conditions. To contribute to reference designs that reflect that need, this article presents designs for the key depth-dependent components – mooring lines and dynamic cables – for a 15-megawatt semisubmersible floating wind turbine in three U.S. regions: Humboldt Bay, the Gulf of Maine, and the Gulf of Mexico. These regions have varied metocean conditions and water depths. The Humboldt mooring system is composed of taut polyester rope, designed for deep, 800-meter (m) water depths and significant current loading. The Gulf of Maine mooring design is an intermediate-depth (200-m) semitaut mooring system composed of chain and polyester rope. The Gulf of Mexico mooring design is a shallow-water catenary chain mooring system for 80-m depth. A lazy wave dynamic cable was also designed for each site, tuned to the offsets of the accompanying mooring system. The mooring and cable designs were initially optimized with a quasi-static tool, then dynamic time-domain simulations were used to check tension, fatigue, and curvature as applicable before iterating on the designs. The final mooring designs pass all ultimate and fatigue load requirements. The dynamic cable designs meet all tension and curvature requirements, in coupled mooring and cable simulations of the extreme cases. The presented mooring and cable designs provide the components that can be combined with existing platform and turbine designs to form full reference floating wind array designs for these U.S. regions.]]></description>
      <pubDate>Wed, 22 Apr 2026 16:13:42 GMT</pubDate>
      <guid>https://trid.trb.org/View/2660769</guid>
    </item>
    <item>
      <title>OPB and IPB phenomena on mooring chain observed by scaled dynamic tank experiment</title>
      <link>https://trid.trb.org/View/2660632</link>
      <description><![CDATA[The high failure rate of mooring systems due to fatigue damage remains a critical industry concern, necessitating a deeper understanding of Out-of-Plane Bending (OPB) and In-Plane Bending (IPB) on mooring chains. While prior studies have investigated OPB/IPB mechanisms in large-diameter chains, their test benches applied only static displacement, without replicating the realistic dynamic catenary response induced by floater motion. Consequently, the direct contribution of floater dynamics to chain bending remains unclear. To address this limitation, the authors conducted a scaled tank experiment successfully measuring OPB and IPB strain under dynamic catenary motion. The experiment utilized 4 mm and 6 mm diameter chains instrumented with micro-sized strain gauges with waterproof treatment to investigate: (i) OPB and IPB behavior, (ii) OPB strain distribution within a link, (iii) strain decay along downstream links and (iv) scale effects between 4 and 6 mm diameter. The results provided new insights into OPB/IPB phenomena and verified the correlation of bending strain with mooring tension, acceleration, and displacement. Based on these findings, the OPB/IPB mechanisms were identified, and new formulas were proposed for estimating both OPB and IPB stresses directly from floater motion, without relying on Interlink angle. This paper details the experimental setup, key measurement results, the stress calculation equations, and a discussion of the limitations in scaled experiment.]]></description>
      <pubDate>Wed, 22 Apr 2026 16:13:42 GMT</pubDate>
      <guid>https://trid.trb.org/View/2660632</guid>
    </item>
    <item>
      <title>Data-driven condition monitoring of mooring systems: A demonstration with the M4 multi-float wave energy converter</title>
      <link>https://trid.trb.org/View/2660628</link>
      <description><![CDATA[Monitoring the condition of mooring systems is essential for the safe operation and timely maintenance of floating platforms including wave energy converters (WECs). However, mooring dynamics are highly nonlinear due to nonlinearities in wave forcing, marine growth effects on floater and mooring cables or chains, WEC dynamics, synthetic cable or chain nonlinearity, and floater-mooring coupling. These effects reduce the effectiveness of linear system identification methods and make accurate condition assessment challenging. In this study, we introduce a data-driven approach for condition monitoring that uses dynamic modelling to address these challenges. The method enables continuous monitoring, allowing gradual or sudden changes to be detected and faults addressed promptly. A time-delay neural network (TDNN) with Bayesian regularization backpropagation is employed to model the system’s behaviour. Its performance is comprehensively compared with four popular models. The approach is validated using two surrogate fault scenarios: (i) two different mooring configurations tested in the same basin, and (ii) nominally identical configurations tested in two different basins. Using six-degree-of-freedom (6-DOF) motion data, the approach is demonstrated to identify the fault condition for all sea states under both scenarios, demonstrating the robustness and sensitivity for subtle changes, for unseen and complex conditions.]]></description>
      <pubDate>Tue, 21 Apr 2026 14:30:16 GMT</pubDate>
      <guid>https://trid.trb.org/View/2660628</guid>
    </item>
    <item>
      <title>Experimental investigation of breaking loads in mooring ropes under different mooring conditions</title>
      <link>https://trid.trb.org/View/2688279</link>
      <description><![CDATA[Failures of mooring ropes remain a critical safety concern during berthing operations, often leading to severe injuries and structural damage due to snap-back phenomena. Although ropes are routinely exposed to angular loading at fairleads, chocks, and bollards, conventional breaking load tests rarely represent these conditions. This study experimentally investigates the influence of operational mooring configurations and wear on rope performance. Baseline performance was determined through straight-pull tests, followed by breast-line and spring-line configurations implemented on a 1:8 scaled test rig. Mechanical response and post-failure dynamics were captured using integrated load cells and high-frame-rate imaging. The results indicate that mooring configurations cause reductions in breaking load compared to straight-pull conditions. Under spring-line mooring, breaking load decreased by 6.87% for new polyester ropes and 1.90% for new polypropylene ropes. Polyester exhibited higher strength retention and more stable deformation behaviour, while wear further amplified performance degradation. Spring-line configurations caused force amplification at fairlead locations, with fairlead loads exceeding rope breaking loads in all tests. Average snap-back velocities of the recoiling rope end reached up to approximately 811 km/h under straight-pull conditions in the 1:8 scaled configurations. These findings provide experimentally grounded guidance for rope selection, inspection, and renewal, contributing to mooring safety.]]></description>
      <pubDate>Wed, 08 Apr 2026 13:55:55 GMT</pubDate>
      <guid>https://trid.trb.org/View/2688279</guid>
    </item>
    <item>
      <title>ROV deployment onboard a small OSV coupled with a floating wind turbine by a single point mooring system</title>
      <link>https://trid.trb.org/View/2653008</link>
      <description><![CDATA[The offshore renewable energy sector has recently adopted a cost-effective approach for inspecting and maintaining both fixed and floating offshore wind turbines (FOWTs). A coupled numerical model is utilized to simulate the deployment of a remotely operated underwater vehicle (ROV) from a small offshore service vessel (OSV) moored to a FOWT via a single point mooring system (SPMS). The model analyses the dynamic response characteristics of the umbilical cable, connecting lines, and mooring lines under environmental conditions representative of the North Sea, validated against full-scale operational data. Simulation results demonstrate that dynamic tensions in the umbilical cable and mooring lines — key factors determining the environmental limits for safe ROV deployment — are significantly influenced by wind-wave misalignment and the relative distance between the OSV and FOWT. While umbilical tension was minimally affected by misalignment, the connecting line load peaked at a 10-degree offset, an angle to be avoided in harsh seas. A relative distance of approximately 20 m between the OSV and FOWT is recommended for balanced line loads. This research systematically investigates component interactions to establish safe operational ranges, providing critical guidance for ROV-assisted maintenance in offshore wind farms.]]></description>
      <pubDate>Mon, 06 Apr 2026 08:50:04 GMT</pubDate>
      <guid>https://trid.trb.org/View/2653008</guid>
    </item>
    <item>
      <title>Floater motions of a 15 MW floating offshore wind turbine under extreme waves after mooring line failure</title>
      <link>https://trid.trb.org/View/2653020</link>
      <description><![CDATA[According to observations, the operation of floating offshore wind turbine (FOWT) faces the potential hazard of successive extreme waves (SEWs). These waves increase the transient response of the floater and threaten the system safety, especially after mooring line failure. To understand this issue, we focus on the effects of extreme waves with two large crests. A fully coupled model is developed to investigate the floater motions of a 15 MW semi-submersible FOWT under the impact of four types of SEWs with different impact times. The blade element momentum theory, three-dimensional potential flow theory, and finite element theory are employed for the aero-hydro-elastic model. Mooring failure amplification effects are quantified and assessed using a novel impact factor. Our work demonstrates that the floater motions exhibit variations in both amplitude and phase under the SEW impacts. The increase in wave height amplifies the wave loads, leading to increases in the wavelet energy at the wave frequency and natural frequencies. The out-of-horizontal-plane motions are less affected by the mooring line failure compared with the in-horizontal-plane motions as the mooring system primarily provides horizontal stiffness. Notably, it is interesting to find that the mooring line failure reduces the pitch motion in SEWs compared with the intact mooring system.]]></description>
      <pubDate>Mon, 06 Apr 2026 08:50:04 GMT</pubDate>
      <guid>https://trid.trb.org/View/2653020</guid>
    </item>
    <item>
      <title>Optimization of mooring system layouts and parameters for floating wind turbines under extreme sea states</title>
      <link>https://trid.trb.org/View/2653037</link>
      <description><![CDATA[Under extreme sea states, the combined effect of wind, wave, and current (WWC) can induce large-amplitude motion responses of floating offshore wind turbines (FOWTs), which pose significant challenges to the mooring systems. To enhance mooring system performance, this study investigates the optimization of mooring system layouts and parameters, focusing on mooring line configurations, the number of lines, critical mooring line parameters (length, diameter, angle, and fairlead position), and the position and mass of clump weights. The effects of mooring layouts and parameters on mooring system performance are systematically summarized. Preliminary optimization results are obtained for the mooring line configurations and their number, followed by a multi-objective optimization analysis of four key parameters, i.e., line length, line diameter, fairlead position, and clump weight mass. With the objective of minimizing the maximum platform offset and mooring line tension, Kriging surrogate models are constructed based on initial sample points, and a Pareto Frontier is developed from extensive surrogate-based predictions to identify optimal solutions. The results demonstrate enhanced mooring system performance after optimization, with the maximum offset reduced by 2.5 % and the maximum tension reduced by 14.3 %. This study provides a valuable technical reference for the optimized design of mooring systems for FOWTs under extreme sea states.]]></description>
      <pubDate>Mon, 06 Apr 2026 08:50:03 GMT</pubDate>
      <guid>https://trid.trb.org/View/2653037</guid>
    </item>
    <item>
      <title>Parametric comparative analysis of curved and straight submerged floating tunnels under wave loading</title>
      <link>https://trid.trb.org/View/2653033</link>
      <description><![CDATA[To date, most research on submerged floating tunnels (SFTs) has been limited to straight geometries, whereas horizontally curved geometries remain insufficiently investigated in terms of both theoretical aspects and structural behavior, despite their potential benefits in improving stiffness through arch action. To address this research gap, this study derives the equations of motion and natural boundary conditions accounting for mooring lines. Subsequently, a comparative investigation of the structural behavior of curved and straight tunnels is carried out through finite element simulations. The structural responses of a 1 km-span tunnel were evaluated under two mooring configurations—vertical (Type 1) and inclined (Type 2)—with particular focus on maximum responses and arching effects, in order to identify the most rational mooring configuration. Additional analyses under Type 2 were performed to evaluate the effects of span length (1000 m, 2000 m, and 4000 m) and rise-to-span ratio on natural frequencies, bending moments, axial forces, and von Mises stresses. The results revealed that curvature induced an arching effect, redistributing internal forces induced by waves into axial forces and thereby significantly reducing structural responses. For the 4000 m span case, the maximum von Mises stress was reduced by as much as 87 %, remaining only 13 % of that observed in the straight tunnel. These findings demonstrate the structural efficiency of curved SFTs, particularly in long-span applications.]]></description>
      <pubDate>Mon, 06 Apr 2026 08:50:03 GMT</pubDate>
      <guid>https://trid.trb.org/View/2653033</guid>
    </item>
    <item>
      <title>Experimental and numerical investigation of floating offshore substation dynamic responses with mooring line failures</title>
      <link>https://trid.trb.org/View/2649725</link>
      <description><![CDATA[Among various floating offshore substations (FOSS) concepts, the barge-type platforms offer advantages such as smaller draft and simple mooring arrangement. However, the occurrence of mooring-line failure can trigger significant transient responses, posing serious risk to the safety and operability of the platform. This paper conducts both model experiment and numerical simulations to investigate the transient responses of a barge-type FOSS subjected to single line failure at one-corner. Comprehensive numerical simulations are performed to examine the effects of different peaks and failure instants of tension under both regular and regular sea states. Statistical analyses and spectrum power of dominated response parameters including platform motions, mooring tension, and accelerations are carried out. The results indicate that the instantaneous failure scenario produces substantially more severe responses than steady-state damage condition. For Line 1, the maximum tension increases by a factor of 4.3 at H = 1.0 m, but reduces to 0.61 times the reference value at Hs = 2.3 m, accompanied by large discrepancies in the standard deviation of windward-line tension. Meanwhile, a reasonable selection of the failure instants for each tension peak is critical. The remaining maximum tensions for above irregular waves differ by 16.6 % and 50 %, respectively. Additionally, highest peak tensions in windward line typically occur in phase with the maximum peaks of surge and platform acceleration. Following mooring failure, the wave-frequency energy in windward-line tensions increases markedly, leading to enhanced dynamic fluctuations in tension time histories.]]></description>
      <pubDate>Fri, 03 Apr 2026 12:12:45 GMT</pubDate>
      <guid>https://trid.trb.org/View/2649725</guid>
    </item>
    <item>
      <title>Wavelet-Aided learning for condition monitoring of floating offshore wind turbine mooring systems</title>
      <link>https://trid.trb.org/View/2648351</link>
      <description><![CDATA[Floating offshore wind turbines (FOWTs) have emerged as a promising solution to harness stronger and more consistent wind resources in deep-sea environments. The stability and uninterrupted functioning of FOWTs are significantly reliant on the integrity of their mooring systems. This paper develops a data-driven condition monitoring framework for catenary mooring lines to guarantee reliable operation in challenging marine conditions. Due to limited real-world data on submerged mooring line faults, this study leverages OpenFAST simulations of the 15 MW IEA reference turbine to generate realistic response data under healthy and damaged conditions across diverse metocean environments. To address the complex, non-stationary characteristics of the mooring system sensor data, this study first implements a preprocessing phase that integrates wavelet transform with statistical signal analysis. Building on enriched feature representation, two convolutional neural network (CNN) architectures are employed to learn discriminative patterns for accurate and robust mooring line damage detection: a residual network-based one-dimensional CNN architecture and a hybrid ResNet–bidirectional long short-term memory architecture. Extensive simulation results show that the proposed framework delivers over 99.90 % accuracy in identifying and localizing mooring line faults and surpasses 92.10 % accuracy in assessing degradation from early to medium stages under diverse operational settings.]]></description>
      <pubDate>Wed, 01 Apr 2026 11:47:08 GMT</pubDate>
      <guid>https://trid.trb.org/View/2648351</guid>
    </item>
    <item>
      <title>Floating solar PV response to wave action</title>
      <link>https://trid.trb.org/View/2648605</link>
      <description><![CDATA[In this study, the hydrodynamic behaviour of a floating photovoltaic (FPV) platform designed by ISIGENERE was evaluated through 107 experimental tests conducted in a wave tank at Cantabria Coastal and Ocean Basin (CCOB, IHCantabria). The system, composed of interconnected floating units joined using nylon plates reinforce with fiberglass, was tested under regular and irregular wave conditions to understand the interactions between waves and the floating structure. The results highlight that the dynamic regime of the platform is primarily determined by the wave period. For longer periods, the platform behaves as a wave follower, whereas shorter periods induce higher motion amplitudes of the windward floats because of increased energy dissipation. In terms of wave direction, energy dissipation is most efficient under perpendicular waves (90°). In this study, the mooring system was also assessed, revealing that surge and heave motions dominate its response, with energy concentrated at frequencies matching those of the waves. These findings are critical for optimizing the design of FPV platforms and enhancing their energy dissipation capacity and mooring resilience under various marine conditions. This study provides empirical data and design insights to support the development and global integration of efficient, scalable floating photovoltaic systems.]]></description>
      <pubDate>Wed, 01 Apr 2026 11:47:08 GMT</pubDate>
      <guid>https://trid.trb.org/View/2648605</guid>
    </item>
    <item>
      <title>Study of damaged and transient effects of the grand trine shared mooring system for floating offshore wind farms</title>
      <link>https://trid.trb.org/View/2647556</link>
      <description><![CDATA[The growing demand for renewable energy has driven focus toward floating offshore wind turbines (FOWTs), although their economic viability remains hindered by high costs. While shared mooring designs employ shared lines among multiple FOWTs as a coupled multibody system, their safety redundancy under extreme conditions, including mooring line failure scenarios, still requires extensive validations. This study aims to evaluate the dynamic behaviors of a grand trine shared mooring system for floating offshore wind farms under mooring line failure scenarios in 50-year return period storm conditions. Both damaged and transient analyses are conducted for a 3-FOWT grand trine shared mooring floating offshore wind farm in different mooring line failure scenarios by the in-house software Kraken to investigate the dynamic behaviors and transient effects. Results indicate the failure of a shared mooring line significantly affects the offset and line tension of the connected FOWTs, while having a minimal impact on other FOWTs unconnected with the shared line. The FOWT motions exhibit significant transient effects when the line failure deviates from the environmental load direction, while mooring line tensions exhibit negligible transient effects. The static and dynamic tension of shared lines in failure scenarios is significantly lower than upstream anchored lines, which exhibit minimal differences compared to those in intact conditions.]]></description>
      <pubDate>Mon, 30 Mar 2026 08:56:23 GMT</pubDate>
      <guid>https://trid.trb.org/View/2647556</guid>
    </item>
  </channel>
</rss>