<rss version="2.0" xmlns:atom="https://www.w3.org/2005/Atom">
  <channel>
    <title>Transport Research International Documentation (TRID)</title>
    <link>https://trid.trb.org/</link>
    <atom:link href="https://trid.trb.org/common/TRIS Suite/feeds/RSS.aspx?s=PHNlYXJjaD48cGFyYW1zPjxwYXJhbSBuYW1lPSJkYXRlaW4iIHZhbHVlPSJhbGwiIC8%2BPHBhcmFtIG5hbWU9InN1YmplY3Rsb2dpYyIgdmFsdWU9Im9yIiAvPjxwYXJhbSBuYW1lPSJ0ZXJtc2xvZ2ljIiB2YWx1ZT0ib3IiIC8%2BPHBhcmFtIG5hbWU9ImxvY2F0aW9uIiB2YWx1ZT0iMCIgLz48L3BhcmFtcz48ZmlsdGVycz48ZmlsdGVyIGZpZWxkPSJpbmRleHRlcm1zIiB2YWx1ZT0iJnF1b3Q7TGlmdCBmYW5zJnF1b3Q7IiBvcmlnaW5hbF92YWx1ZT0iJnF1b3Q7TGlmdCBmYW5zJnF1b3Q7IiAvPjwvZmlsdGVycz48cmFuZ2VzIC8%2BPHNvcnRzPjxzb3J0IGZpZWxkPSJwdWJsaXNoZWQiIG9yZGVyPSJkZXNjIiAvPjwvc29ydHM%2BPHBlcnNpc3RzPjxwZXJzaXN0IG5hbWU9InJhbmdldHlwZSIgdmFsdWU9InB1Ymxpc2hlZGRhdGUiIC8%2BPC9wZXJzaXN0cz48L3NlYXJjaD4%3D" rel="self" type="application/rss+xml" />
    <description></description>
    <language>en-us</language>
    <copyright>Copyright © 2026. National Academy of Sciences. All rights reserved.</copyright>
    <docs>http://blogs.law.harvard.edu/tech/rss</docs>
    <managingEditor>tris-trb@nas.edu (Bill McLeod)</managingEditor>
    <webMaster>tris-trb@nas.edu (Bill McLeod)</webMaster>
    <image>
      <title>Transport Research International Documentation (TRID)</title>
      <url>https://trid.trb.org/Images/PageHeader-wTitle.jpg</url>
      <link>https://trid.trb.org/</link>
    </image>
    <item>
      <title>Performance and operability of an electrically driven propulsor</title>
      <link>https://trid.trb.org/View/2120667</link>
      <description><![CDATA[This manuscript discusses the operation of an electrically driven fan for a hybrid-electric propulsion system for BAe-146 aircraft. The thrust requirement is fed into an integrated cycle and aerodynamic design tool for the sizing of a ducted fan as one of the main propulsors, podded under the wing as a replacement for a turbofan engine. The electric motor design is initiated with the torque and speed requirements and with the dimensional constraints arising from the driven fan geometry. The fan operation and aerodynamic design are derived by changing the fan pressure ratio and hub-to-tip ratio to obtain a 2-D design space. Surface-mounted permanent magnet electric motor designs are mapped on the 2-D fan design space. The design and operational flexibility of the system is investigated through three scenarios. In the first scenario, the aircraft rate of climb is changed to downsize the electric motor. In the second scenario, the electric motor rated frequency is changed to increase the power density and in the third scenario the electric motor current density is changed for the same purpose. The investigated three scenarios provide design and operational guidelines for reducing the weight of the electric motor for a direct drive application.]]></description>
      <pubDate>Thu, 23 Mar 2023 10:20:42 GMT</pubDate>
      <guid>https://trid.trb.org/View/2120667</guid>
    </item>
    <item>
      <title>Design of Four Ducted Fan-Type Electric Vertical Take-off and Landing
     Flying Car</title>
      <link>https://trid.trb.org/View/2061043</link>
      <description><![CDATA[Under the emerging urban air mobility (UAM) concept, electric vertical take-off and landing (eVTOL) aircraft were designed to alleviate urban traffic congestion due to their advantages of low take-off and landing site requirements, less pollution, low noise, and strong stability. However, due to the high-level power consumption of eVTOL and only having air flight mode, this kind of aircraft has a severe shortage of cruising range. To improve the endurance and dynamic performance, the flying car designed in this paper added a ground driving mode based on eVTOL and used distributed ducted fans to provide lift. And the influence of different power transmission routes on the dynamic and economic performance of the flying car was analyzed. On this basis, the overall take-off weight of the flying car was estimated through an iterative algorithm, and parameter design and power system matching for each part of the components were conducted. Finally, this paper used MATLAB/Simulink to build a flying car power system model and verified the performance of the flying car through simulation. The results show that the ducted fan is superior to the isolated fan in providing both lift and noise control. The maximum flying speed of the flying car that adopts the power transmission route of four in-wheel motors and four-rotor motors is 5.1% higher than that of four wheel-side motors combined with mechanical transmission structures. In pure ground driving conditions, the flying car can continue to travel 627.6 km at 100 km/h. In pure air flight conditions, the flying car can continue to fly 88.37 km at 100 km/h. In hybrid conditions, the flying car can continue to travel 418.4 km on the ground at 100 km/h after taking off to avoid traffic obstacles five times, each time the distance is 2 km.]]></description>
      <pubDate>Mon, 21 Nov 2022 16:19:21 GMT</pubDate>
      <guid>https://trid.trb.org/View/2061043</guid>
    </item>
    <item>
      <title>Volantor* - A Powered Lift Aircraft for Personal Use</title>
      <link>https://trid.trb.org/View/1805882</link>
      <description><![CDATA[This paper describes a class of “powered lift” aircraft called volantors that utilize multiple ducted fans for generating thrust. Thrust is directed vertically for lift during vertical takeoff and landing and horizontally during cruise. The change in thrust direction is accomplished by partially rotating the ducted fans and partially redirecting the airflow at the duct exit through a series of variable camber vanes. This arrangement avoids the potential of duct leading edge stall during transition that arises if the thrust is re-directed solely by rotating the ducts through 90°. In addition to the above fundamental design arrangement this paper discusses the technical issues and developments that need to be addressed in order to provide a volantor that is practical enough for large scale personal use.]]></description>
      <pubDate>Fri, 30 Sep 2022 12:09:20 GMT</pubDate>
      <guid>https://trid.trb.org/View/1805882</guid>
    </item>
    <item>
      <title>Transient Vibratory Response of Turbofan Engine Rotor Impacted by Bird Strike</title>
      <link>https://trid.trb.org/View/1842902</link>
      <description><![CDATA[This paper presents a semiclosed-form physics-based rotordynamic analysis which determines the transient bird-strike load at the blade root and at the support bearings of a rotating fan shaft. This research considered a turbofan aeroengine application of a continuous fan shaft supported at multiple bearing locations and subjected to an impact loading caused by bird ingestion during normal flight operation of the aircraft. The mathematical formulation of the governing equation considers inertial effects as well as all circulatory terms involving gyroscopic and Coriolis forces. In the numerical simulation, the incoming bird was a cylindrical projectile and the blade was the target. The large impulsive load generated by the bird-strike incident traveled through the airfoil, fan disk, rotor shaft, rolling element bearings, and finally to the entire engine support structure. The structural details of the fan disk and shaft were treated as an overhung spinning beam supported on three bearings system. The highly nonlinear transient dynamic numerical results for all the relevant dynamical design parameters have been presented for a typical large commercial jet engine. It has been shown that the dynamic magnification factor for the transient vibratory response of the fan rotor impacted by a bird strike can be as much as 3 times that of the normal steady-state response of the similar unbalance.]]></description>
      <pubDate>Thu, 27 May 2021 12:38:55 GMT</pubDate>
      <guid>https://trid.trb.org/View/1842902</guid>
    </item>
    <item>
      <title>Experimental study of a ducted contra-rotating lift fan for vertical/short takeoff and landing unmanned aerial vehicle application</title>
      <link>https://trid.trb.org/View/1571216</link>
      <description><![CDATA[This study explores the aerodynamic characteristics of a ducted contra-rotating lift fan for vertical/short takeoff and landing application by means of force, pressure, and flow field measurements. The effect of rotating frequency and contra-locomotion on the force generation was examined using a miniature six-component force sensor. Additionally, for the sake of considering the ground effect, the flow field at the exit was investigated using high-response pressure measurement. Results revealed that the lift shows a quadratic generation trend on increasing the r/min where the inherent unsteady flow contradicts the conventional quasi-steady model of propeller. The contra-rotating mechanism can significantly augment the lift while still being lower than double single rotors. The unsteadiness of the contra-rotating rotors is quite obvious where two high-pressure regions are revealed and rotate. When the lift fan approaches the ground, the lift will be augmented significantly due to the surplus of the wake jet.]]></description>
      <pubDate>Mon, 31 Dec 2018 09:05:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/1571216</guid>
    </item>
    <item>
      <title>Experimental and numerical study of an airfoil in combination with a cross flow fan</title>
      <link>https://trid.trb.org/View/1252194</link>
      <description><![CDATA[In this article, the airfoil comprising a cross flow fan has been studied at various boundary conditions by experiment and numerical solution. The airfoil generates high lift at low forward speeds and shows excellent potential for short take off and landing and vertical take off and landing. According to the experiments, lift and pitching moment coefficients of the airfoil increase and its drag coefficient reduces with the fan rotational velocity. The pitching moment coefficient enhancement demonstrates that the aircraft is more stable at higher rotational speeds. Experiments showed that the aerodynamic coefficients decrease with the free stream Reynolds number. Flow field over the airfoil has been studied by the computational fluid dynamics technique and compared with the experimental data. Numerical solution was in good agreement with the experiments. Solution showed that skin friction coefficient on the airfoil bottom wall is not sensitive to the rotational velocity, but on the upper surface, especially inside the casing, it is deeply influenced by the fan speed, while it increases with the Reynolds number on the both surfaces. According to the numerical solution, the static pressure difference between the airfoil surfaces increases with rotational velocity demonstrating higher lift coefficients at higher fan speeds, and also increases with the Reynolds number that is equivalent to the enhancement of the aerodynamic forces as shown by the experiments. Because of a sharp edge a sudden jump was observed in the pressure distribution on the airfoil upper wall. By replacing this sharp edge with a smooth and round one this pressure jump reduced significantly and pressure distribution on the modified surface became smoother and its extremal value diminished considerably. The streamlines on the upper surface were closer than those on the bottom surface indicating higher pressure on the airfoil bottom wall. They became closer on the airfoil upper surface when fan speed increased. In addition, velocity gradient on the airfoil surfaces increased with the Reynolds number that is tantamount to a higher skin friction coefficient. Discrepancies between numerical and experimental data can be attributed to measurement uncertainty in the experiments and convergence precision in the numerical solution, two-dimensional solution in the computational fluid dynamics and three dimensionality of the flow at the wing tips in reality.]]></description>
      <pubDate>Mon, 17 Jun 2013 14:16:15 GMT</pubDate>
      <guid>https://trid.trb.org/View/1252194</guid>
    </item>
    <item>
      <title>Experimental Investigation of a Forward Swept Rotor in a Multistage Fan with Inlet Distortion</title>
      <link>https://trid.trb.org/View/1127461</link>
      <description><![CDATA[Previous studies of transonic swept rotors in single stage fans have demonstrated the potential of significant improvements in both efficiency and stall margin with forward swept blading. This paper extends the assessment of the payoff derived from forward sweep to multistage configurations. The experimental investigation compare two builds of an advanced two-stage fan configuration tested alternately with a radial and a forward swept stage 1 blade. In the two-stage evaluations, the testing was extended to include the effect on inlet flow distortion. While the common second stage among the two builds prevented the overall fan from showing clean inlet performance and stability benefits with the forward swept rotor 1, this configuration did demonstrate superior front stage efficiency and tolerance to inlet distortion. Having obtained already low distortion sensitivity with the radial rotor 1 configuration relative to current production military fan standards, the sensitivity to inlet distortion was halved with the forward swept rotor 1 configuration. In the case of the 180-degree one-per-rev distortion pattern, the two-stage configuration was evaluated both with and without inlet guide vanes (IGVs). The presence of the inlet guide vanes had a profound impact in lowering the two-stage fan's sensitivity with inlet distortion.]]></description>
      <pubDate>Mon, 30 Jan 2012 14:58:03 GMT</pubDate>
      <guid>https://trid.trb.org/View/1127461</guid>
    </item>
    <item>
      <title>Effect of span variation on the performance of a cross flow fan</title>
      <link>https://trid.trb.org/View/854843</link>
      <description><![CDATA[Over the past few decades, advances in aeronautic and control technologies have established a new vision for future air transportation systems. NASA has initiated the motion with several programs supporting the "highway of the sky," a system of launch pads and air pathways enabling smaller and more easily piloted aircraft to travel the open space above instead of busy freeways and crowded city streets. Previous investigations into crossflow fan technology as a propulsion source have identified its potential for use in personal aircraft and vertical takeoff and landing applications. To further development, performance characteristics must be determined for the possible configurations and under variable conditions to understand factors critical to design. This experiment studied flow characteristics of a crossflow fan incorporating 30 blades of six inch length in a six inch diameter rotor. Comparison was made against the performance of a fan of similar design but one-fourth the length span previously tested. Results were plotted for various parameters along constant speed lines of operation and general trends were determined. These results were used to quantitatively deduce scaling relationships for this device.]]></description>
      <pubDate>Thu, 24 Apr 2008 20:40:39 GMT</pubDate>
      <guid>https://trid.trb.org/View/854843</guid>
    </item>
    <item>
      <title>AIR CUSHION CRAFT DEVELOPMENT. FIRST REVISION</title>
      <link>https://trid.trb.org/View/155591</link>
      <description><![CDATA[A technical summary is given of the development of air cushion craft from their inception to the present day. The designation "air cushion craft" encompasses any craft that relies on a cushion of air for a significant part of its support and operates in close proximity to the surface. The technical summary covers both aerostatic craft known as air cushion vehicles (ACV) and surface effect ships (SES) as well as aerodynamic craft such as wing-in-ground effect vehicles (WIG). Other variants are included in the review. Where possible, the various available theories empirical laws, and experimental data have been brought together and expressed in unified form. Emphasis has been given to reducing the data and analysis to their simplest forms for easy understanding and isolation of fundamental parameters. In the interest of historical accuracy, care has been taken to cite the original work on any particular theory or piece of data. To make this report readily available, in some instances it has been necessary to avoid the use of classified or proprietary data but this has not been hampered the citing of original work. Currently operational craft, those still in their construction jigs, or in some cases those still on the drawing board are assessed and compared to the basic theories to give a measure of the state-of-the-art.]]></description>
      <pubDate>Mon, 16 Sep 2002 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/155591</guid>
    </item>
    <item>
      <title>V/STOL ROTARY PROPULSOR NOISE PREDICTION MODEL UPDATE AND EVALUATION</title>
      <link>https://trid.trb.org/View/150741</link>
      <description><![CDATA[The V/STOL Rotary Propulsor Noise Prediction Model developed under contract DOT-FA74WA-3477 was updated and evaluated. In the first phase, a literature review was conducted to identify and evaluate high quality noise measurements of propeller, variable pitch fan, fixed pitch fan, helicopter, lift fan, core engine, and jet noise for the preparation a of data base with emphasis on recent measurements of in-flight propulsors. In the second phase, the effects of forward flight on V/STOL propulsor noise were evaluated and the noise prediction model was improved to give better agreement with current measurements. Lastly, the performance of the noise prediction methodology was evaluated by comparison of calculations with measurements of propulsor noise from the data base. Although certain aspects of the measured propulsor noise, such as installation and ground reflection effects, caused discrepancies between measured and calculated levels (the calculations assume uninstalled propulsors under free-field conditions), the general correlation was good. Typical correlation between measured and calculated one-third octave band levels was + or - 5 dB and between measured and calculated dB(A), PNL, PNLT, and EPNL was + or - 3 dB.]]></description>
      <pubDate>Mon, 22 Jul 2002 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/150741</guid>
    </item>
    <item>
      <title>RECENT EXPERIENCE WITH PARALLEL OPERATING LIFT FANS IN SES</title>
      <link>https://trid.trb.org/View/479971</link>
      <description><![CDATA[The stability of a surface effect ship air cushion maintained by parallel lift fans could be significantly improved by several new fan design features and new control circuits.  This paper highlights the following: 1) Instability of centrifugal fans working in parallel.  2) The development of centrifugal fans having a stable characteristic from large negative air flow values to the air flow at free outlet.  Stability in this respect is defined as a negative gradient of the pressure curve over air flow.  3) Development of a patented bypass control system integrated into the fan inlet shroud.  4) A patented control system co- ordinating the parallel work of several lift fans.  This is based on a master-slave arrangement.  5) An analysis of the real versus virtual hysteresis effects and to which extent they can be counteracted by the bypass system.  6) Improved noise attenuation by Helmholtz type resonators installed on the fan proper, without the use of glass fibre rockwool mats.]]></description>
      <pubDate>Thu, 27 Mar 1997 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/479971</guid>
    </item>
    <item>
      <title>CONCEPTUAL DESIGN STUDY OF A V/STOL LIFT FAN COMMERCIAL SHORT HAUL TRANSPORT.</title>
      <link>https://trid.trb.org/View/630817</link>
      <description><![CDATA[No abstract provided.]]></description>
      <pubDate>Mon, 24 Feb 1997 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/630817</guid>
    </item>
    <item>
      <title>NOTES ON THE THEORY OF HEAVE ATTENUATION</title>
      <link>https://trid.trb.org/View/155416</link>
      <description><![CDATA[This note examines the power required for heave attenuation of SEV, using either cushion air damping or flow modulating fans. Shortage of time has prevented a complete analysis of some aspects, particularly for the modulated flow case which is of most practical interest. Power requirements have been calculated for 100% heave attenuation only in the latter case and the values obtained are naturally very large. More work needs to be done on the partial alleviation case, which is of more practical interest. (Author)]]></description>
      <pubDate>Tue, 22 Jul 1980 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/155416</guid>
    </item>
    <item>
      <title>APPLICATIONS OF ADVANCED V/STOL AIRCRAFT CONCEPTS TO CIVIL UTILITY MISSIONS, VOLUME 1</title>
      <link>https://trid.trb.org/View/56426</link>
      <description><![CDATA[The suitability of advanced V/STOL aircraft to civil utility applications was assessed for offshore oil support, forest fire support, transport, and humanitarian missions. The aircraft concepts considered were a lift fan aircraft, a tilt rotor aircraft, and an advanced helicopter. All the aircraft had a design payload of 2,268 kg. (5,000 lb.) with the maximum range varying from 2,224 km. (1,800 nm) for the lift fan STOL to 1,482 km (800 nm) for the advanced helicopter. The analysis of these missions considered such factors as aircraft performance, annual utilization, initial cost, and operating cost.  It is concluded that all the advanced V/STOL aircraft concepts generally performed these missions better than contemporary aircraft.  The lift fan aircraft and the tilt rotor aircraft were found to be effective for the offshore oil and the forest fire support missions.  The lift fan aircraft in the VTOL mode was also found to be very attractive for the executive transport mission where the passenger time value was $30/hr. or more.]]></description>
      <pubDate>Sat, 30 Jun 1979 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/56426</guid>
    </item>
    <item>
      <title>APPLICATIONS OF ADVANCED V/STOL AIRCRAFT CONCEPTS TO CIVIL UTILITY MISSIONS. VOLUME 2: APPENDICES</title>
      <link>https://trid.trb.org/View/56427</link>
      <description><![CDATA[The linear performance definition curves for the lift fan aircraft, tilt rotor aircraft, and advanced helicopter are given. The computer program written to perform the mission analysis for this study is also documented, and examples of its use are shown. Methods used to derive the performance coefficients for use in the mission analysis of the lift fan aircraft are described.]]></description>
      <pubDate>Wed, 20 Sep 1978 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/56427</guid>
    </item>
  </channel>
</rss>