<rss version="2.0" xmlns:atom="https://www.w3.org/2005/Atom">
  <channel>
    <title>Transport Research International Documentation (TRID)</title>
    <link>https://trid.trb.org/</link>
    <atom:link href="https://trid.trb.org/common/TRIS Suite/feeds/RSS.aspx?s=PHNlYXJjaD48cGFyYW1zPjxwYXJhbSBuYW1lPSJkYXRlaW4iIHZhbHVlPSJhbGwiIC8%2BPHBhcmFtIG5hbWU9InN1YmplY3Rsb2dpYyIgdmFsdWU9Im9yIiAvPjxwYXJhbSBuYW1lPSJ0ZXJtc2xvZ2ljIiB2YWx1ZT0ib3IiIC8%2BPHBhcmFtIG5hbWU9ImxvY2F0aW9uIiB2YWx1ZT0iMCIgLz48L3BhcmFtcz48ZmlsdGVycz48ZmlsdGVyIGZpZWxkPSJpbmRleHRlcm1zIiB2YWx1ZT0iJnF1b3Q7R3Jvb3ZlcyZxdW90OyIgb3JpZ2luYWxfdmFsdWU9IiZxdW90O0dyb292ZXMmcXVvdDsiIC8%2BPC9maWx0ZXJzPjxyYW5nZXMgLz48c29ydHM%2BPHNvcnQgZmllbGQ9InB1Ymxpc2hlZCIgb3JkZXI9ImRlc2MiIC8%2BPC9zb3J0cz48cGVyc2lzdHM%2BPHBlcnNpc3QgbmFtZT0icmFuZ2V0eXBlIiB2YWx1ZT0icHVibGlzaGVkZGF0ZSIgLz48L3BlcnNpc3RzPjwvc2VhcmNoPg%3D%3D" rel="self" type="application/rss+xml" />
    <description></description>
    <language>en-us</language>
    <copyright>Copyright © 2026. National Academy of Sciences. All rights reserved.</copyright>
    <docs>http://blogs.law.harvard.edu/tech/rss</docs>
    <managingEditor>tris-trb@nas.edu (Bill McLeod)</managingEditor>
    <webMaster>tris-trb@nas.edu (Bill McLeod)</webMaster>
    <image>
      <title>Transport Research International Documentation (TRID)</title>
      <url>https://trid.trb.org/Images/PageHeader-wTitle.jpg</url>
      <link>https://trid.trb.org/</link>
    </image>
    <item>
      <title>Best Practices for Placing Concrete Overlays on Prestressed Slab Bridges</title>
      <link>https://trid.trb.org/View/1583722</link>
      <description><![CDATA[The objective of this research was to identify alternatives to the Maryland Department of Transportation State Highway Administration’s (MDOT SHA's) procedure of placing cast-in-place concrete overlays on prestressed bridge decks. The current practice involves the application of a cement-sand slurry mix over the bridge deck prior to placement of overlay concrete. The reinforcement cage for the overlay is removed from its position to facilitate uniform, consistent application of slurry mix over the bridge deck and then subsequently placed back in position. Overlay concrete is then poured to finish the procedure. The current process is time sensitive as it requires that the slurry mix at the deck-overlay interface is in a non-set condition and is still consistent when the overlay concrete is being poured. To evaluate alternatives to this process, this research tested the shear bond and tensile bond strengths by two different test setups: Double-L test and Split-Prism test, respectively. Seven different cases including the reference test case that uses slurry mix were designed for both test setups and the results compared to suggest recommendations for laying concrete overlays in future projects. Of the six cases other than the reference case with slurry mix, four cases simply had different groove configurations running on the underlying substrate. The other two cases involved use of a commercial bonding agent and anchors used as shear studs. Use of materials, mix design specifications, and curing regimes, were in accordance with current MDOT SHA specifications and industry practices. The results of the research on the prestressed slab panels with pre-existing grooves over which the overlay concrete could be directly poured without the need for a slurry or other bonding agents, were very positive. The average bond shear strength values for all the four test cases that have different square-shaped groove configurations (¼ in., 3/8 in. and ½ in. deep grooves at spacing of ½ in. and 1 in.) along the interface were recorded to be higher than the reference test case that uses slurry mix. Based on consultation with the prestressed precast slab manufacturing plants, precast slabs with standard groove configurations could, theoretically, be manufactured at plants for direct use during bridge construction. The overlay concrete could then be directly poured over these panels replacing the current practice. The interlocking effect obtained through the grooves contributed significantly to the bond shear strength and provided good bond characteristics as indicated in the research findings.]]></description>
      <pubDate>Sun, 24 Feb 2019 19:06:20 GMT</pubDate>
      <guid>https://trid.trb.org/View/1583722</guid>
    </item>
    <item>
      <title>The Effect of Wear Groove on Vibration and Noise of Aircraft Brakes: Theoretical and Experimental Evidence</title>
      <link>https://trid.trb.org/View/1430167</link>
      <description><![CDATA[The goal of this paper is to delineate recent experimental evidence that the presence of conforming surface wear groove tends to stabilize the vibration and noise response of aircraft brakes. This finding is consistent with an earlier theoretical study in which the contact between Carbon-Carbon (C/C) composite brake disks was assumed to be visco-elastic and through this assumption it was found that the existence of conforming grooves results in increasing dynamic stability of brake disk interaction. Therefore, the presumption of visco-elastic contact for C/C brakes seems to agree with the experimental observation in a subscale dynamometer.         The present paper summarizes both theoretical analysis and the test results. In the tests C/C composites were heat treated for one hour at temperatures 1800°C and 2400°C, respectively. They were then subjected to frictional tests in a subscale aircraft brake dynamometer at 50 % relative humidity (RH) level. Coefficient of friction (µ), vibration and noise were recorded during simulated braking. The surface topography was determined after each sequence of friction tests. The nanohardness of fiber and matrix in bulk composite were measured using a nanoindenter. The hardness of fiber was found to be two times that of the matrix for the samples heat treated at 2400°C as compared to the samples heat treated at 1800°C. The surface roughness (sRa) was measured as 1.96 µm for the sample heat treated at 2400°C after the 100% simulated normal landing energy conditions. The sample heat treated at 1800°C exhibited smoother friction surface (sRa=0.86µm). During braking, µ varied by a factor of 2 or more which led to undesirable vibration.         Both the theoretical model and the tests results point to the same conclusion; existence of conforming grooves enhances dynamic stability of a disk pair, resulting in significant reduction in vibration and noise in braking.       ]]></description>
      <pubDate>Wed, 21 Nov 2018 16:53:16 GMT</pubDate>
      <guid>https://trid.trb.org/View/1430167</guid>
    </item>
    <item>
      <title>Study on the Shape of Buoyancy Body for Vortex Induced Vibration Suppression - Experiments in Small Circulating Water Channel</title>
      <link>https://trid.trb.org/View/1538335</link>
      <description><![CDATA[In this paper, the shape of buoyancy body was experimentally studied to have the body itself a suppression performance on Vortex Induced Vibration (VIV). Based on the performances required for the buoyancy body and existing appendages for VIV suppression, some buoyancy body models with helical grooves were created. The ratio of pitch and depth of the groove was fixed, and the groove width was changed as a parameter for VIV suppression performance. In a small circulating water channel, the authors measured the force acting on the models, the flow field around the models, and the motion of the models. Experimental results showed that the helical groove with adequate width has a possibility of VIV suppression if the ratio of pitch and depth of the groove was fixed.]]></description>
      <pubDate>Tue, 11 Sep 2018 11:16:11 GMT</pubDate>
      <guid>https://trid.trb.org/View/1538335</guid>
    </item>
    <item>
      <title>Analyzing Effect of Tire Groove Patterns on Hydroplaning Speed</title>
      <link>https://trid.trb.org/View/1102734</link>
      <description><![CDATA[Hydroplaning is a major safety concern in wet-weather driving. Grooved tires have been commonly used to improve skid resistance and increase the hydroplaning speed. Tire grooves help in the expulsion of water from the tire pavement contact region by providing escape channels. Past researchers have shown that tire groove spacing, groove width, and groove depth affect skid resistance. However, analytical tools are unavailable for highway engineers to evaluate hydroplaning speed taking into account basic geometric parameters such as tire groove width, groove depth, and spacing. The present paper describes a numerical analytical tool to study the effect of tire groove spacing, groove width, and groove depth on hydroplaning speed by means of earlier verified analytical hydroplaning modeling for tire having transverse groove pattern, longitudinal groove pattern, and combined transverse and longitudinal groove pattern on plane pavement surface are analyzed in this paper.]]></description>
      <pubDate>Mon, 23 May 2011 07:14:53 GMT</pubDate>
      <guid>https://trid.trb.org/View/1102734</guid>
    </item>
    <item>
      <title>A STUDY DESIGN FOR DUAL MODE PLANNING CASE STUDY</title>
      <link>https://trid.trb.org/View/41552</link>
      <description><![CDATA[This document is a Study Design for a Dual Mode Planning Case Study to be carried out for the Milwaukee, Wilconsin, Metropolitan region.  The 14 month case study is expected to develop a methodology for dual mode planning at the sketch planning level of detail, to provide feedback to the UMTA dual mode hardware design effort, and to evaluate the usefulness of recent UMTA software development efforts for conducting such a case study.  The Study Design includes a detailed description of the individual project tasks and subtasks which will be carried out.  The tasks emphasize both the need to represent dual mode as a new transportation technology with many uncertainties as to its characteristics; and the need to consider the goals, objectives, and socioeconomic and trip making characteristics of the local area.  In addition to the description of the planned technical work steps, this document also contains cost allocations, time schedules, organizational arrangements and management control procedures for the conduct of this project.]]></description>
      <pubDate>Thu, 05 Jun 2003 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/41552</guid>
    </item>
    <item>
      <title>MONITORING PREVENTION OF SINGLE VEHICLE RUN-OFF-THE-ROAD ACCIDENTS</title>
      <link>https://trid.trb.org/View/477965</link>
      <description><![CDATA[The principal objective of this study was to monitor existing sections of rural, multi-lane, divided highway in Texas that have received shoulder treatments designed to mitigate single vehicle run-off-the-road (SVROR) accidents.  The study evaluated SVROR accidents over an 8-year period, 1987-1994.  Statistical analyses of the pre- and post-treatment accident data indicated that SVROR accidents do occur on certain highway control sections at a rate suggestive of a potential problem.  Control sections can be evaluated for degree of SVROR problem potential by computing z scores for that particular highway control section and evaluating if the value exceeds 85% of the values of all other control sections over a period of several years. Highway control sections exhibiting a value above the 0.85 z score can be identified in the majority of those Texas control sections that received shoulder mitigation during the period 1989-1994; treated sections were not constructed prior to 1989. Two factors were found to influence the z score and evaluation of a control section:  very short highway control sections with SVROR accidents tend to inflate the z score and highway control sections with very high ADT and SVROR accidents tend to deflate the z score.  Discounting single years of unusually large numbers of SVROR accidents in a control section, comparative analyses of treated highway control sections and adjacent non-treated comparable highway control sections without treatments demonstrated a significant reduction in SVROR accidents as a result of some type of shoulder treatment. Analysis did not definitively identify particular types of shoulder treatments as being more effective than others. However, depressed grooves formed by milling are recommended as the best treatment in sections constructed in PCC and HMAC pavements, particularly in snow-removal regions.  Rolled-in grooves, using bars welded to a steel wheel roller, are recommended as the alternative to milled-in grooves.  One hundred-mm diameter non-reflectorized traffic buttons placed at 1.5 m intervals parallel to and offset 150 to 300 mm from the driving lane edge line are recommended for "chip-and-seal" type of shoulder paving or in other situations where milled or depressed grooves are not feasible.]]></description>
      <pubDate>Mon, 17 Mar 1997 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/477965</guid>
    </item>
    <item>
      <title>INVESTIGATION OF BONDING MATERIALS FOR PIEZOELECTRIC TRAFFIC MONITORING EQUIPMENT. INTERIM REPORT</title>
      <link>https://trid.trb.org/View/447698</link>
      <description><![CDATA[Proper highway design requires the use of accurate traffic data. Such data are collected by traffic monitoring equipment installed in the road surface.  This equipment usually consists of piezoelectric sensors, either 1.8 m or 3.6 m long (6 or 12 ft long), installed in a groove cut into the pavement, and held in place by a bonding agent.  This study was undertaken at the request of the Texas Department of Transportation (TxDOT), in an effort to find bonding agents applicable to this use. Preliminary research consisted of a literature search, DOT survey, and manufacturers survey to determine the current practice.  Materials were selected and screened with some basic laboratory tests to determine their basic physical and material properties.  Compatibility tests were conducted to determine the bond characteristics.  Field tests were also conducted to determine the installation parameters of the materials. Finally, the test results were analyzed to determine which materials would perform satisfactorily in actual use. Recommendations are made, listing the most promising materials and the selection criteria to be used in future evaluations.]]></description>
      <pubDate>Fri, 01 Sep 1995 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/447698</guid>
    </item>
    <item>
      <title>PERMANENT CONCRETE PAVEMENT MARKINGS. FINAL REPORT</title>
      <link>https://trid.trb.org/View/422612</link>
      <description><![CDATA[The visibility, durability, and cost-effectiveness of surface pavement markings and previous experience with permanent concrete paving markings (PCPM) (markings with a service life similar to that of the pavement) are described.  The use of durable materials, such as thermoplastics, polyesters, and epoxies, improves the service life of surface markings. However, these marking materials still exhibit problems of adhesion to pavement and rapid wear in high traffic areas.  Snow removal procedures significantly reduce marking service life. Wet nighttime visibility is a continuing problem with surface markings.  Previous attempts at developing PCPM have produced systems with very good durability, but poor nighttime visibility.  The potential for developing cost-effective PCPM systems that can provide both long-term durability and adequate visibility throughout the service life and the requirements for such systems are discussed.  Polymers, such as epoxies, can provide superior durability and adhesion to pavement.  The application of larger than standard size glass beads can improve wet nighttime visibility.  The cost of PCPM systems can be significantly reduced using effective methods of placing grooves in which the marking material is placed.  Generally, there is a good probability that a cost-effective PCPM system with satisfactory durability and visibility can be developed.  The PCPM systems with thicknesses of 9.5 mm (3/8 in.) or less will be cost-effective for a 20-year service life, and the systems with thicknesses of 3.2 mm (1/8 in.) or less will be cost-effective for a 10-year service life.]]></description>
      <pubDate>Tue, 11 Jul 1995 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/422612</guid>
    </item>
    <item>
      <title>STUDY ON THE EVALUATION METHOD OF WET RUNWAY SURFACE TEXTURE</title>
      <link>https://trid.trb.org/View/411418</link>
      <description><![CDATA[It is well known that the grooving on runway surfaces is highly effective to prevent the hydroplaning during airplane take-off and landing on wet runways.  But, the initial performance of the grooving deteriorates due to the rubber deposits on runway surfaces.  Therefore, a new method of measuring and evaluating the runway surface texture was developed.  Using this new method, surface texture measuring tests of the grooved runway at Tokyo International Airport were conducted right before and after rubber removal.  The operational runway texture data obtained can be used as a reference to provide safe management of grooved runways.]]></description>
      <pubDate>Fri, 20 Jan 1995 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/411418</guid>
    </item>
    <item>
      <title>THE INFLUENCE OF JOINT WIDTHS AND SPACING ON PAVEMENT RIDING QUALITIES</title>
      <link>https://trid.trb.org/View/99529</link>
      <description><![CDATA[THE INFLUENCE OF TRANSVERSE JOINT WIDTH AND SPACING ON PAVEMENT RIDING QUALITY WAS INVESTIGATED TO DETERMINE IF IT WAS POSSIBLE TO REDESIGN TRANSVERSE JOINTS, THUS IMPROVING JOINT SEALER PERFORMANCE WITHOUT AFFECTING RIDING QUALITY. DURING A FIELD TEST, PAVEMENT ROUGHNESS AND NOISE LEVELS WERE MEASURED FOR JOINTS FROM 3/8 TO 1 1/2 IN. WIDE, SPACED ON 40 FT. AND ON 60 FT. 10 IN. CENTERS. IT WAS FOUND THAT (1) INCREASE IN ROUGHNESS DUE TO VARYING THE GROOVE WIDTH WAS SMALL, AND DID NOT AFFECT RIDING QUALITY, (2) NO DIFFERENCE IN ROUGHNESS RESULTED FROM REDUCING SPACING BETWEEN JOINTS, AND (3) ALTHOUGH INCREASE IN NOISE LEVEL MEASURED BY SOUND RECORDING EQUIPMENT WAS NEGLIGIBLE, THE HUMAN EAR DEFINITELY DETECTED SOUND CAUSED BY JOINTS OF 7/8 IN. WIDTH OR MORE WHEN SPACED 60 FT. 10 IN. APART, AND OF 5/8 IN. WIDTH OR MORE WHEN SPACED 40 FT. APART. /AUTHOR/]]></description>
      <pubDate>Fri, 07 Oct 1994 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/99529</guid>
    </item>
    <item>
      <title>TIRE DISABLEMENTS AND ACCIDENTS ON HIGH-SPEED ROADS</title>
      <link>https://trid.trb.org/View/111304</link>
      <description><![CDATA[RESULTS ARE PRESENTED OF A STUDY OF TIRE DISABLEMENTS AND ACCIDENTS ON A TOLL ROAD. THE STUDY WAS MADE ON A TOLL ROAD FOR THE FOLLOWING REASONS: (1) TOLL COLLECTIONS GIVE A VERY PRECISE MEASUREMENT OF VEHICLE MILEAGE, (2) CONTINUOUS HIGH SPEED IS ACKNOWLEDGED TO BE SEVERE ON TIRE SERVICE AND INCREASES ACCIDENT SEVERITY, (3) ACCIDENTS ARE MORE COMPLETELY REPORTED ON A TOLL ROAD, AND (4) UNIFORM SPEEDS MINIMIZE SPEED AS A VARIABLE IN THE STUDY. ONLY FOUR-TIRED VEHICLES WERE INCLUDED IN THE STUDY, MAINLY, PASSENGER CARS. THREE SURVEYS WERE CONDUCTED WHICH GAVE DISABLEMENT RATES FOR THREE TEMPERATURE-TRIP LENGTHS COMBINATIONS. DISABLEMENTS PER MEAN CAR MILES VARIED FROM 29 FOR LOW TEMPERATURE AND LONG TRIPS TO 71 FOR HIGH TEMPERATURE AND SHORT TRIPS. A CONDITION SURVEY WAS CONDUCTED ON 1746 FOUR- TIRED VEHICLES IN THE PARKING AREAS OF FIVE SERVICE CENTERS. AMONG THE 1746 CARS SURVEYED, THERE WERE 1022 AILING TIRES. THIS WOULD AVERAGE 0.59 AILING TIRE PER CAR. FOR THE 12 MONTHS OF THE STUDY, PATROLMEN ON THE TOLLWAY WERE REQUESTED TO MAKE A SPECAIL REPORT WHEN THEY ENCOUNTERED A CAR STOPPED ON THE ROADSIDE WITH A DISABLED TIRE. THE REPORT INCLUDED THE SAME DATA COLLECTED IN THE CONDITION SURVEY, EXCEPT THAT THE LOAD ON TIRES AND AIR PRESSURE IN THE DISABLED TIRE COULD NOT BE MEASURED. COMPARING TREAD WEAR OF DISABLED TIRES WITH THOSE IN GENERAL USE PERMITTED CALCULATION OF DISABLEMENT INDEXES FOR VARIOUS REMAINING TREAD DEPTHS. IT WAS FOUND THAT THE DISABLEMENT CURVE RISES SHARPLY AFTER WEAR REDUCES GROOVE DEPTH TO LESS THAN 2/32 INCH. THIS FACT SUPPORTS 2/32 IN. AS AN INSPECTION STANDARD REQUIREMENT. BALD TIRES APPEAR TO BE ABOUT 45 TIMES AS SUSCEPTIBLE TO DISABLEMENT AS NEW TIRES. POLICE MADE REPORTS ON TIRE DISABLEMENTS FOLLOWED BY ACCIDENTS. THESE DATA WERE COMPARED WITH THE SURVEY OF DISABLEMENT NOT FOLLOWED BY ACCIDENTS AND THE CONDITION SURVEY. DURING THE 12 MONTHS NOT MORE THAN 36 ACCIDENTS FOLLOWED TIRE DISABLEMENTS. RISK INDEXES WERE COMPUTED BY AGE AND SEX FOR DRIVERS OF CARS EXPERIENCING ACCIDENTS FOLLOWING DISABLEMENTS. STUDY RESULTS INDICATE THAT PEOPLE WHO PAY TO USE A TOLL ROAD ARE LIKELY TO AFFORD BETTER TIRES THAN OTHER CAR OWNERS. HIGH SPEEDS, HOWEVER, ARE MORE LIKELY TO CAUSE DISABLEMENTS AND MAKE COPING WITH THEM MORE DIFFICULT.]]></description>
      <pubDate>Thu, 22 Sep 1994 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/111304</guid>
    </item>
    <item>
      <title>TRANSPORTATION OF POWDERY BULK GOODS ON MAGNETICALLY DIVEN SWINGING GROOVES</title>
      <link>https://trid.trb.org/View/101861</link>
      <description><![CDATA[THE TRANSPORTATION OF POWDERY BULK GOODS ON NORMAL SWINGING GROOVES IS DISTRUBED BY VARIOUS FACTORS WHICH LIMIT THE USE OF SUCH APPLIANCES. THIS IS DUE TO THE AIR PENETRATION, THE VIBRATION BETWEEN THE SWINGING BASE AND THE POWDERY BULK. THIS EXPLAINS THE IRREGULAR BEHAVIOUR WHICH IS EFFECTED BY THE BULK THICKNESS. WITH THE AID OF A FLEXIBLE LINING ON THE BOTTOM OF THE SWINGING GROOVES THE DISTURBANCES CAN BE AVOIDED AND THE UNCERTAINTY IN THE DESIGNING OF THE SWINGING GROOVES IS AVOIDED. FOR THE OUTLET GROOVES OR PIPES OF THE CONTAINER SWINGING, PIVOTING AND TURNING FLAPS HAVE BEEN DEVELOPED WHICH HELP TO REGULATE THE FLOW OF POWDERY GOODS. /AUTHOR/]]></description>
      <pubDate>Thu, 28 Apr 1994 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/101861</guid>
    </item>
    <item>
      <title>USE OF RUMBLE STRIPE TO REDUCE MAINTENANCE AND INCREASE DRIVING SAFETY INTERIM REPORT</title>
      <link>https://trid.trb.org/View/108807</link>
      <description><![CDATA[A RUMBLE STRIPE IS A TEXTURED HIGHWAY PAINT STRIPE. THE STRIPE IS CUT IN CONCRETE HIGHWAYS. IT CONSISTS OF A LONGITUDINAL GROOVE PATTERN CUT THE LENGTH OF A REGULAR PAINT STRIPE AND TRANSVERSE CUTS WHICH ALLOW DRAINAGE AND PROVIDE A RUMBLE EFFECT. THE GROOVED AREAS ARE PAINTED WITH REGULAR TRAFFIC PAINT. THE RUMBLE AS THE NAME IMPLIES SHOULD PRODUCE A RUMBLE NOISE. BECAUSE THERE WAS LITTLE OR NO RUMBLE PRODUCED, DEPENDING UPON DESIGN AND TRANSVERSE CUT WIDTH, THE RUMBLE STRIPE, CONTRARY TO THE IMPLICATION OF ITS NAME, IS VIRTUALLY PERFORMING AS A VISIBILITY STRIPE. THIS REPORT IS LIMITED TO THE SAFETY ASPECT OF THE VISIBILITY STRIPE. AN EVALUATION OF THE CONTRIBUTION OF THE VISIBILITY STRIPE TOWARD DECREASING MAINTENANCE COSTS IS IMPOSSIBLE AT THIS TIME. THE REASONS ARE THAT THE STRIPE WAS PAINTED IN JANUARY OF THIS YEAR WITH TEMPORARY PAINT BEING USED. THE MAINTENANCE PART OF THIS STUDY WILL START AFTER THE HIGHWAY IS PAINTED LATER THIS SUMMER. THIS INVESTIGATION THUS FAR HAS SHOWN THAT THE VISIBILITY STRIPE IS SUPERIOR TO THE REGULAR STRIPE IN VISIBILITY, ESPECIALLY DURING A RAINSTORM BOTH AT NIGHT AND DURING THE DAY. THE VISIBILITY STRIPE INCREASES DRIVING SAFETY AND SHOULD HAVE APPLICATION TO MANY HIGHWAYS. /AUTHOR/]]></description>
      <pubDate>Sat, 05 Mar 1994 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/108807</guid>
    </item>
    <item>
      <title>EFFECTS OF TEMPERATURE ON EARLY CRACK FORMATION IN PORTLAND CEMENT CONCRETE PAVEMENTS</title>
      <link>https://trid.trb.org/View/382532</link>
      <description><![CDATA[Major distress problems of concrete pavements generally start with crack formation caused by the combined effects of traffic load and service temperature.  Water and salt can easily infiltrate into pavement at the location of cracks and create durability and structural problems.  Although crack formation has an important effect on the durability and structural capacity of concrete pavements, studies on the crack formation mechanisms in concrete are still limited to conventional stress-based or strain-based elasticity analysis because of the complexity of the problem.  Recently because of the promising features of fracture mechanics-based models, fracture mechanics analysis on concrete structures is receiving more attention from researchers.  A cohesive crack model was used to study the effect of temperature on crack formation in concrete pavements and to demonstrate the feasibility of fracture mechanics analysis on concrete pavement systems.  It was found that the peak temperature differential that causes formation of random cracks in the pavement is sensitive to the age of the pavement; to properly control the occurrence of random cracking, saw-cut grooves should be introduced at the earliest possible age of the concrete pavement.]]></description>
      <pubDate>Tue, 28 Sep 1993 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/382532</guid>
    </item>
    <item>
      <title>EFFICIENCY OF HIGHWAY STORM WATER INLETS. FINAL REPORT</title>
      <link>https://trid.trb.org/View/357550</link>
      <description><![CDATA[This experimental study defines the capacity of storm water inlets used by the Nebraska Department of Roads (NDOR) and tests modified inlets for possible future use.  A wooden roadway with full and half-scale inlet systems was constructed to simulate field conditions.  The longitudinal- and cross-slope of the roadway were 2% and 3%, respectively. The report describes the hydraulic performance of standard and modified inlets using inlet efficiency and capacity and spread of flow.  Three categories of inlets were tested. The first category included a single standard NDOR 72-in. inlet and two inlets in series, a single Saddle Creek grate and two grates acting in series, and a canted 72-in. inlet. The second category included four different configurations of the standard inlet, each moditied differently in an attempt to increase efficiency and reduce a standing oblique wave that reflects onto the roadway from the inlet.  The third category involved changing the roadway by placing rumble bars upstream, cutting grooves upstream, and finally simulating roadway resurfacing.  A series of graphs and figures document the performance of each inlet in the different categories.  An extensive photograph file and video footage accompanies the report.  It is concluded that properly installed upstream transitions are extremely important in maximizing inlet efficiency.  The standard NDOR inlet in particular performs very well when upstream transitions are installed properly.  Efficiency increased only ten to fifteen percent for all other configurations. Roadway resurfacing that covers upstream transitions decreases inlet efficiency drastically.]]></description>
      <pubDate>Tue, 31 Dec 1991 00:00:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/357550</guid>
    </item>
  </channel>
</rss>