<rss version="2.0" xmlns:atom="https://www.w3.org/2005/Atom">
  <channel>
    <title>Transport Research International Documentation (TRID)</title>
    <link>https://trid.trb.org/</link>
    <atom:link href="https://trid.trb.org/common/TRIS Suite/feeds/RSS.aspx?s=PHNlYXJjaD48cGFyYW1zPjxwYXJhbSBuYW1lPSJkYXRlaW4iIHZhbHVlPSJhbGwiIC8%2BPHBhcmFtIG5hbWU9InN1YmplY3Rsb2dpYyIgdmFsdWU9Im9yIiAvPjxwYXJhbSBuYW1lPSJ0ZXJtc2xvZ2ljIiB2YWx1ZT0ib3IiIC8%2BPHBhcmFtIG5hbWU9ImxvY2F0aW9uIiB2YWx1ZT0iMCIgLz48L3BhcmFtcz48ZmlsdGVycz48ZmlsdGVyIGZpZWxkPSJpbmRleHRlcm1zIiB2YWx1ZT0iJnF1b3Q7QW1wbGl0dWRlJnF1b3Q7IiBvcmlnaW5hbF92YWx1ZT0iJnF1b3Q7QW1wbGl0dWRlJnF1b3Q7IiAvPjwvZmlsdGVycz48cmFuZ2VzIC8%2BPHNvcnRzPjxzb3J0IGZpZWxkPSJwdWJsaXNoZWQiIG9yZGVyPSJkZXNjIiAvPjwvc29ydHM%2BPHBlcnNpc3RzPjxwZXJzaXN0IG5hbWU9InJhbmdldHlwZSIgdmFsdWU9InB1Ymxpc2hlZGRhdGUiIC8%2BPC9wZXJzaXN0cz48L3NlYXJjaD4%3D" rel="self" type="application/rss+xml" />
    <description></description>
    <language>en-us</language>
    <copyright>Copyright © 2026. National Academy of Sciences. All rights reserved.</copyright>
    <docs>http://blogs.law.harvard.edu/tech/rss</docs>
    <managingEditor>tris-trb@nas.edu (Bill McLeod)</managingEditor>
    <webMaster>tris-trb@nas.edu (Bill McLeod)</webMaster>
    <image>
      <title>Transport Research International Documentation (TRID)</title>
      <url>https://trid.trb.org/Images/PageHeader-wTitle.jpg</url>
      <link>https://trid.trb.org/</link>
    </image>
    <item>
      <title>Influence Analysis of the Metro Nstray Current on AC Power Grid Based on Surface Potential Gradient</title>
      <link>https://trid.trb.org/View/2580425</link>
      <description><![CDATA[The metro stray current can change the surface potential distribution, which will affect the grounding equipment of the power grid. In order to analyze the interference range and influence degree of metro stray current, the DC traction power supply system was equivalent to the resistance network model, so the stray current and rail potential can be calculated numerically. Based on the potential field distribution of the point current source in uniform media, by using the superposition principle, the potential distribution and gradient change of the whole line stray current at any position were realized. The research showed that the stray current is closely related to the running state of trains on the metro line. The more trains in accelerating and decelerating state, the wider the spreading range of stray current and the larger the amplitude of surface potential.]]></description>
      <pubDate>Thu, 22 Oct 2026 15:50:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/2580425</guid>
    </item>
    <item>
      <title>Fatigue and Nonlinear Performance Characterization of Asphalt Mastics: A Combined Approach</title>
      <link>https://trid.trb.org/View/2705951</link>
      <description><![CDATA[Asphalt mastics, composed of a bitumen matrix and fillers, play a vital role in the fatigue failure of asphalt mixtures. However, the mechanisms by which fillers influence the fatigue properties of asphalt mastics have not been thoroughly investigated. Moreover, fatigue failure in bituminous materials is often accompanied by pronounced nonlinear behavior, yet the relationship between fatigue performance and nonlinearity remains unclear. In this study, a novel approach for characterizing the nonlinear properties of asphalt mastics was developed by integrating Fourier transform rheology and Lissajous curve analysis with the linear amplitude sweep (LAS) test. Two categories of fillers—traditional mineral fillers and solid waste fillers—were selected to systematically examine their effects on the fatigue property of asphalt mastics. The study further established a unified relationship between the fatigue and nonlinear properties of asphalt mastics, incorporating a toughness parameter. The results indicate that the LAS test, combined with advanced rheological analysis, enables accurate characterization of the nonlinear behavior of asphalt mastics. The influence of fillers on fatigue property is governed by the competing effects of negative physical hardening and positive particle-filling enhancement. Although the addition of fillers generally reduces the fatigue life of asphalt mastics, it simultaneously enhances their nonlinear characteristics. Notably, asphalt mastics containing solid waste fillers exhibit superior fatigue resistance and nonlinear performance compared to those with conventional mineral fillers. The unified expression relating fatigue life, nonlinearity, and toughness provides new insights into the design and performance evaluation of high-performance asphalt mastics. This research offers a significant reference for the development and optimization of durable and sustainable asphalt materials.]]></description>
      <pubDate>Fri, 28 Aug 2026 08:34:57 GMT</pubDate>
      <guid>https://trid.trb.org/View/2705951</guid>
    </item>
    <item>
      <title>Amplitude/Phase Monopulse Receiver Comparison</title>
      <link>https://trid.trb.org/View/2719325</link>
      <description><![CDATA[The purpose of this test effort was to collect performance data on a phase and an amplitude type monopulse receiver that would provide a basis for comparing the relative tradeoffs of the two approaches. In particular, the thrust of this effort was to evaluate the azimuthal accuracies and the useable beamwidths of each type of receiver. It is expected that the results of the testing conducted under this effort will form part of the basis for assessing the merits of either approach if proposed for the production Mode S sensors.]]></description>
      <pubDate>Mon, 13 Jul 2026 09:39:25 GMT</pubDate>
      <guid>https://trid.trb.org/View/2719325</guid>
    </item>
    <item>
      <title>Zero-Sequence High-Frequency Voltage Injection-Based Sensorless Method for Open-Winding-PMSM Drives With Common DC Bus</title>
      <link>https://trid.trb.org/View/2665522</link>
      <description><![CDATA[This article proposes a sensorless method for open-winding (OW)-permanent magnet synchronous machine (PMSM) drives with common dc bus utilizing zero-sequence (ZS) high-frequency (HF) voltage injection. The injection pattern is implemented with the ZS steerable space vector pulsewidth modulation. The three phase HF currents are amplitude-modulated by the rotor saliency. The rotor position can be extracted via a position observer with concise demodulation process. Different from other HF injection-based sensorless methods relating to the ZS, the proposed method no longer needs to build the ZS path deliberately. When compared with the classical HF voltage injection-based methods, owing to the separation of the injection voltage and the field-oriented control output voltage, the proposed method exhibits lower loss, vibration, and acoustic noise. Finally, the effectiveness of the proposed sensorless method is verified by experiments on a 12-slot/10-pole OW-PMSM drive platform.]]></description>
      <pubDate>Mon, 01 Jun 2026 09:13:31 GMT</pubDate>
      <guid>https://trid.trb.org/View/2665522</guid>
    </item>
    <item>
      <title>PDC-SWM-LPF: A novel feature extraction method for on-board detection of wheel polygonal wear</title>
      <link>https://trid.trb.org/View/2669699</link>
      <description><![CDATA[Wheel polygonal wear often leads to a decrease in vehicle ride comfort, causes fractures in vehicle components, and can result in serious accidents. Therefore, monitoring the fault state of polygonal wheel in real time is particularly important. Currently, quantitative analysis of polygonal wheels mainly adopts a big data-driven approach. However, in practical engineering scenarios, there is not always an abundance of data, posing challenges for the amplitude recognition of polygonal wheels. This paper employs an Improved Complete Ensemble Empirical Mode Decomposition with Adaptive Noise (ICEEMDAN) to determine the order of polygonal wheel wear. On this basis, a feature extraction method (SWM-LPF) for the probability density curve (PDC) vibration acceleration of axle box was proposed, enabling the generalized regression neural network (GRNN) to predict the amplitude of polygonal wheel with limited sample support. In ablation experiments, Residual Neural Network (ResNet) and 1D-CNN were used as the baseline models. The experiments show that using only 16.7% of the training samples required by the baseline models, SWM-LPF enabled GRNN to achieve comparable accuracy in estimating the amplitude of polygonal wheel. With the assistance of SWM-LPF, the iteration rounds of ResNet and 1D-CNN were reduced by 80%, significantly improving the accuracy of amplitude detection for polygonal wheel.]]></description>
      <pubDate>Tue, 26 May 2026 09:41:00 GMT</pubDate>
      <guid>https://trid.trb.org/View/2669699</guid>
    </item>
    <item>
      <title>A theory-LSTM hybrid model of a swing-arm rubber bushing to represent the temperature, amplitude, and frequency dependencies for railway vehicle simulation</title>
      <link>https://trid.trb.org/View/2643039</link>
      <description><![CDATA[The swing-arm rubber bushing (SARB) is a key suspension component that guarantees the vehicle’s running stability and curve safety. This paper introduces a hybrid model combining theory and Long Short-Term Memory (LSTM), designed for dynamic simulations of railway vehicles to capture the SARB’s temperature, amplitude, and frequency dependencies. The hybrid model comprised the theoretical and LSTM parts in series: the theoretical model provides mechanical predictive trends, while the LSTM enhances prediction accuracy. The experimental data verified the hybrid model’s accuracy in reflecting the three dependencies. Furthermore, the hybrid model was incorporated into a railway vehicle to assess its performance under stochastic vehicle excitation. Results indicate that the model demonstrates significant nonlinearity during dynamic simulations. The hybrid model effectively corrects the overestimation of displacement at small amplitudes and high frequencies, while also revealing that the SARB hardens at low temperatures, negatively affecting the vehicle’s curve safety.]]></description>
      <pubDate>Wed, 18 Mar 2026 09:01:39 GMT</pubDate>
      <guid>https://trid.trb.org/View/2643039</guid>
    </item>
    <item>
      <title>Assessing the ship motion prediction capabilities of the open-source model NEMOH against field observations</title>
      <link>https://trid.trb.org/View/2633977</link>
      <description><![CDATA[Accurate ship motion prediction is critical for safe and efficient maritime operations, particularly in open ocean environments. This study evaluates the capability of NEMOH, an open-source potential flow boundary element solver, as an example of a ship motion prediction tool for real-world open ocean conditions. A linear model, known as the Response Amplitude Operator (RAO), is obtained using NEMOH and is combined with the wave directional spectrum derived from the WaMoS-II marine radar on the research vessel Akademik Tryoshnikov during the Antarctic Circumnavigation Expedition (ACE) to predict ship motion responses in the frequency domain. Predictions of heave, pitch and roll are benchmarked against concurrent ship motion observations recorded by an onboard inertial measurement unit (IMU). The comparisons, based on the zeroth order moment of the ship motion spectrum, demonstrate a reliable heave prediction (Pearson correlation coefficient r=0.89, scatter index SI=0.41), a reasonable pitch prediction (r=0.80, SI=0.47), and an acceptable roll prediction (r=0.63, SI=0.84). More significant discrepancies for pitch and roll are identified under specific extreme sea conditions. The results demonstrate the capability of NEMOH, offering insights into its applicability for real-world maritime operations.]]></description>
      <pubDate>Wed, 04 Mar 2026 09:16:08 GMT</pubDate>
      <guid>https://trid.trb.org/View/2633977</guid>
    </item>
    <item>
      <title>Scaling, Matching, and Variability: Effects of Ground Motion Selection in Performance Uncertainty</title>
      <link>https://trid.trb.org/View/2668494</link>
      <description><![CDATA[The selection of ground motions for time series analysis of structures remains a topic of considerable debate. While both time domain method and spectral matching are permitted by the Caltrans Seismic Design Criteria (SDC), the implications of the choice are not fully understood. To explore and compare how these different modification methodologies affect the estimation of means and distributions of bridge response parameters, two highway bridges in California were analyzed using suites of scaled and spectrally matched motions developed in accordance with Caltrans SDC. Hazard curves for engineering demand parameters (EDPs) are also developed using conditional scenario spectra (CSS) framework for each bridge to be used as a metric to evaluate the results. The results demonstrate that the spectral matching methodology consistently yields lower bias and variability in EDP predictions compared to amplitude scaling for both bridge models and at both sites. Specifically, spectral matching produced means closer to the CSS benchmark and more consistent predictions of peak drift ratios across suites.]]></description>
      <pubDate>Mon, 23 Feb 2026 11:19:43 GMT</pubDate>
      <guid>https://trid.trb.org/View/2668494</guid>
    </item>
    <item>
      <title>On the coupling mechanism of the large-amplitude swing motion in the floating crane vessel under wave action</title>
      <link>https://trid.trb.org/View/2660682</link>
      <description><![CDATA[Offshore lifting operations with floating crane vessels are fundamental to marine engineering. However, the intricate coupling among the wave, the crane vessel, and the lifting object could induce significant oscillation, even under favorable wave conditions. This study provides a more comprehensive analysis of coupling relationships among these elements compared to prior research. The coupled analysis model is developed to investigate the complex coupling mechanism, integrating the lifting object motion model, derived using Lagrange's equations, into motion equations of a moored crane vessel under wave action. Numerical simulation is conducted on the coupled model under varying wave periods and swing periods. Motion characteristics are analyzed to reveal the coupling mechanism of the large-amplitude swing. The findings indicate that primary resonance occurs when wave period coincides with swing period of the lifting object, resulting in a maximum swing amplitude. The natural periods of the crane vessel, particularly its dominant roll period, critically amplify the system's dynamic response. More significantly, a subharmonic resonance phenomenon emerges when the swing period of the lifting object equals twice the wave period (2:1 ratio). Given the low-frequency characteristic of subharmonic resonance, this phenomenon could be more likely to occur, requiring particular attention during offshore lifting operations.]]></description>
      <pubDate>Wed, 11 Feb 2026 15:10:45 GMT</pubDate>
      <guid>https://trid.trb.org/View/2660682</guid>
    </item>
    <item>
      <title>Impact of viscoelastic continuum damage parameters on bitumen fatigue life using the linear amplitude sweep test</title>
      <link>https://trid.trb.org/View/2602758</link>
      <description><![CDATA[The viscoelastic continuum damage (VECD) theory becomes largely used to predict the fatigue life of asphalt binders. In VECD modeling, the damage evolution rate parameter “α” and the fatigue parameter “A” are critical for constructing damage characteristic curves (DCC) and predicting fatigue life. The literature identifies four different definitions for the α parameter and two distinct formulas for the A parameter, based on the pseudo strain energy (PSE) approach. This study investigates the impact of these α and A parameters on the fatigue life of binders using the Linear Amplitude Sweep (LAS). Based on the PSE approach, DCC and fatigue life were determined with the different definitions of α and A. Results indicate that the α parameter significantly affects the damage at failure (Df) values without impacting material integrity at failure (Cf), thereby influencing the DCC. Both A and α parameters impact the predicted fatigue life (Nf). The recommended α and A parameters for the PSE approach yielded fatigue life results comparable to those obtained using the dissipated strain energy (DSE) approach when the peak shear stress was used as the failure criterion. This study provides a framework for assessing the fatigue behavior of asphalt binders using the LAS test.]]></description>
      <pubDate>Wed, 12 Nov 2025 09:35:16 GMT</pubDate>
      <guid>https://trid.trb.org/View/2602758</guid>
    </item>
    <item>
      <title>Comparative analysis of the fatigue characterisation of natural rock asphalt/SBS composite modified asphalt binders using time sweep test and linear amplitude sweep test</title>
      <link>https://trid.trb.org/View/2595297</link>
      <description><![CDATA[Fatigue cracking is one of the most notable distresses in steel bridge deck pavement (SBDP), necessitating the development of high performance pavement materials to extend service life. In this paper, the fatigue resistance characteristics of natural rock asphalt (NRA)/SBS systematically evaluated. Twelve types of composite-modified asphalt binders were prepared by incorporating Iranian rock asphalt (IRA), Buton rock asphalt (BRA), and SBS as modifiers. IRA and BRA were added at 5 wt%, 10 wt%, and 15 wt%, while SBS was introduced at 2 wt% and 3 wt%. The modified asphalt binders subjected to time sweep (TS) test and linear amplitude sweep (LAS) test to comparatively analyze fatigue damage and fatigue life. DSR-C model was applied to calculate the fatigue crack length. The research also comparative evaluate differences and correlations between fatigue crack length indexes and conventional fatigue life indexes. The results showed that NRA enhanced the fatigue performance of modified asphalt binders. With the increase of NRA content, the fatigue properties of modified asphalt also become better. S3I15 is better than other composite modified asphalt binders in both fatigue life and fatigue cracking indexes, demonstrating that it offers the best resistance to fatigue damage. The fatigue cracking index calculated by the DSR-based cracking (DSR-C) model could effectively evaluate the fatigue performance of NRA/SBS composite modified asphalt binders. NRA/SBS composite modified asphalt could be widely used in steel bridge deck pavement.]]></description>
      <pubDate>Fri, 17 Oct 2025 09:23:37 GMT</pubDate>
      <guid>https://trid.trb.org/View/2595297</guid>
    </item>
    <item>
      <title>Modeling the fatigue life of asphalt binder considering the effect of loading frequency using linear amplitude sweep (LAS) test</title>
      <link>https://trid.trb.org/View/2578611</link>
      <description><![CDATA[With the increase in traffic volume, accurately predicting the fatigue life of asphalt binders under diverse conditions has played a crucial role in improving the service quality of asphalt pavements. As a typical viscoelastic material, the performance of asphalt binders is significantly affected by loading frequency, whereas existing fatigue life models often neglect this influence. Therefore, it is necessary to develop a fatigue life prediction framework considering the effect of loading frequency. This study employs linear amplitude sweep (LAS) testing to evaluate the fatigue life of asphalt binders at varying strain levels and frequencies. An in-depth analysis of the experimental data is conducted based on the pseudo-strain energy simplified viscoelastic continuum damage (PSE-based S-VECD) theory. The findings indicate a remarkable impact of frequency on the fatigue life of asphalt binders, with a strong linear correlation observed between the loading frequency and the characteristic parameters C₁ and C₂ derived from the damage characteristic curve (DCC). Utilizing this model, the DCCs at any desired loading frequency can be derived by simply conducting LAS tests at two different loading frequencies and fitting the relationship between characteristic parameters and the loading frequencies. To validate the predictive model, this study adopts two criteria for assessing fatigue failure: the 35 % damage level failure criterion and the maximum stress failure criterion. The results demonstrate that the model exhibits excellent predictive accuracy under both criteria. To this end, this research devises a straightforward and effective method for accurately predicting the fatigue life of asphalt binders subjected to varying loading frequency and strain conditions.]]></description>
      <pubDate>Mon, 08 Sep 2025 14:54:03 GMT</pubDate>
      <guid>https://trid.trb.org/View/2578611</guid>
    </item>
    <item>
      <title>Numerical study of asymmetric pitching amplitude effects on energy extraction performance of a semi-activated hydrofoil in shear flows</title>
      <link>https://trid.trb.org/View/2577574</link>
      <description><![CDATA[As a representative tidal current energy device, the operational stability and energy extraction performance of hydrofoils are significantly influenced by shear flow. Inspired by natural models, including insects, birds, and fish, the amplitude asymmetric pitching has been proposed as a strategy to mitigate the adverse impacts of the shear flow. A 2-dimensional (2D) numerical model of a semi-activated hydrofoil was developed using ANSYS-Fluent computational fluid dynamics software to assess the feasibility of amplitude asymmetric pitching. Hydrofoils employing the asymmetric and symmetric pitching motions under uniform and shear flows were studied. The hydrodynamic response and energy extraction performance of the hydrofoil were compared at various shear rates, pitching amplitudes, and asymmetric ratios. The results indicate that amplitude asymmetric pitching enhances both the operational stability and energy extraction performance of the hydrofoil under shear flow conditions. The appropriate asymmetric ratio for stable operation and energy extraction varies depending on the pitching amplitude and shear rate. Appropriate asymmetric ratios were determined using the trial-and-error method. Additionally, flow field comparisons between the asymmetric and symmetric pitching motions elucidated the underlying mechanisms. The amplitude asymmetric pitching does not completely eliminate the adverse effects of shear flow on the hydrofoil's energy extraction performance. The power coefficient of the hydrofoil with an appropriate asymmetric ratio decreases with increasing shear rate.]]></description>
      <pubDate>Fri, 15 Aug 2025 16:32:19 GMT</pubDate>
      <guid>https://trid.trb.org/View/2577574</guid>
    </item>
    <item>
      <title>Pavement Roughness on Expansive Clays</title>
      <link>https://trid.trb.org/View/2561669</link>
      <description><![CDATA[The patterns of pavement roughness caused by expansive clays are due largely to the underlying patterns of cracks in the subgrade soil mass. The cracks will be closer together when the soil is more active and when the climatic wetting and drying cycles have greater influence. The cracking patterns in the soil and the consequent roughness patterns are not uniform but must be characterized as a spectrum of crack spacings and wavelengths with their corresponding amplitudes. Pavement roughness was measured by the GM Profilometer on 23 pavement sections in Texas. Two methods are used to obtain the amplitude versus wavelength spectra that characterize the roughness patterns: the Fast Fourier Transform (FFT) method and the "bump counter" direct method. The two spectra are not the same nor are they expected to be. The FFT method is adopted for characterizing the roughness patterns because of its greater consistency. However, a correspondence is found between the two spectra. As a matter of convenience, the spectra are plotted as amplitude versus frequency, which is the number of wavelengths per unit length. The graphs of amplitude versus frequency were fitted by a power law equation with two constants, c and n, which are found to be correlated with each other. Unique values of c and n characterize the roughness pattern of each pavement and these, in turn, are found to depend upon the composite flexural stiffness of the pavement, time, climatic measures, and several physico-chemical soil properties. Four soil properties are found to be necessary to predict the roughness spectra: (a) cation exchange capacity which is an indicator of the kind of mineral that is present, (b) percent clay which shows how much clay is present in the subgrade soil, (c) exchange sodium percentage which is partly an indication of the geological environment in which the clay was deposited and partly an indication of how erodable and dispersive the soil is, and (d) the plasticity index which is a measure of the moisture reactivity of the soil. The dominant wavelengths in each of the roughness patterns are determined together with cumulative distributions of wavelengths and amplitudes for each of the pavement sections studied. Probability density functions for wavelengths are developed from these data. A method for using these wavelength probabilities and the corresponding amplitude spectral equation is developed to calculate the amount of level-up material that must be placed on the pavement to achieve a smooth ride. A method of computing the amount of material that can be removed by heater-planing and milling operating is also shown. An equation for the loss of serviceability index with time is developed and several examples are presented showing how the serviceability loss depends upon soil and pavement properties. The equation for serviceability index loss constitutes a design equation for pavements on expansive soils.]]></description>
      <pubDate>Mon, 21 Jul 2025 16:19:57 GMT</pubDate>
      <guid>https://trid.trb.org/View/2561669</guid>
    </item>
    <item>
      <title>Evaluation of fatigue and healing performance of high-content polymer modified asphalt based on linear amplitude sweep</title>
      <link>https://trid.trb.org/View/2550474</link>
      <description><![CDATA[Linear amplitude sweep (LAS) test method was widely used to evaluate the fatigue and healing performance of asphalt, and many evaluation indicators and analysis methods were derived from this test. However, the evaluation methods applicable to the fatigue and healing performance of high content polymer modified asphalt (HCPMA) were still largely unknown, which limited the development and practical application of HCPMA. To address this gap, this study conducted fatigue and healing test on three types of HCPMA based on LAS test. A comparative analysis was conducted based on the principles of damage and fracture mechanics to identify the differences in fatigue and healing performance among these HCPMAs. Firstly, combined with the results from fluorescence microscopy and the time sweep test, the proposed fatigue life indicator obtained by damage mechanics analysis can accurately distinguish the fatigue performance of different HCPMAs. Secondly, the LAS-based healing (LASH) test results revealed that the damage healing recovery rate %HS and the crack length recovery rate %Ha conformed the damage-intermittent equivalent principle. This allowed for the construction of complete healing master curve. Furthermore, taking the mean absolute error as the standard, the simplified scheme of %HS healing master curve with high fitting accuracy was determined. Finally, through the simplified schemes, the %HS healing master curves of different HCPMAs in a wide temperature range were constructed. The results showed that the healing performance of different HCPMAs varied significantly with temperature, and the temperature would lead to changes in the ranking of their healing abilities.]]></description>
      <pubDate>Fri, 20 Jun 2025 11:58:42 GMT</pubDate>
      <guid>https://trid.trb.org/View/2550474</guid>
    </item>
  </channel>
</rss>