A NEW MATHEMATICAL NECK MODEL FOR A LOW-VELOCITY REAR-END IMPACT DUMMY: EVALUATION OF COMPONENTS INFLUENCING HEAD KINEMATICS

A mathematical model of a new rear-end impact dummy neck was implemented using MADYMO. The main goal was to design a model with human-like response of the first extension motion in the crash event. The new dummy neck was modelled as a series of rigid bodies (representing the seven cervical vertebrae and the uppermost thoracic element, T1) connected by pin joints, and supplemented by two muscle substitutes. The joints had non-linear stiffness characteristics and the muscle elements possessed both elastic stiffness and damping properties. The new model was compared with two neck models with the same number of vertebrae, but without muscle substitutes. The properties of the muscle substitutes and the need of these were evaluated by using three different modified neck models. The motion of T1 in the simulations was prescribed using displacement data obtained from volunteer tests. In a sensitivity analysis of the mathematical model the influence of different factors on the head-neck kinematics was evaluated. The neck model was validated against kinematics data from volunteer tests: linear displacement, angular displacement, and acceleration of the head relative to the upper torso at 7 km/h velocity change. The response of the new model was within the corridor of the volunteer tests for the main part of the time history plot. This study showed that a combination of elastic stiffness and damping in the muscle substitutes, together with a non-linear joint stiffness, resulted in a head-neck response similar to human volunteers and superior to that of other tested models. (A)

  • Availability:
  • Corporate Authors:

    Elsevier

    The Boulevard, Langford Lane
    Kidlington, Oxford  United Kingdom  OX5 1GB
  • Authors:
    • LINDER, A
  • Publication Date: 2000-3

Language

  • English

Media Info

Subject/Index Terms

Filing Info

  • Accession Number: 00788480
  • Record Type: Publication
  • Source Agency: Transport Research Laboratory
  • Report/Paper Numbers: HS-043 007
  • Files: HSL, ITRD, , ATRI
  • Created Date: Mar 3 2000 12:00AM