STANDARD SPECIFICATIONS FOR HIGHWAY BRIDGES. FIFTEENTH EDITION

These specifications are intended to serve as a standard or guide for the preparation of State specifications and for reference by bridge engineers. Primarily, the specifications set forth minimum requirements which are consistent with current practice, and certain modifications may be necessary to suit local conditions. They apply to ordinary highway bridges and supplemental specifications may be required for unusual types and for bridges with spans longer than 500 feet. The specifications are presented in three divisions: (I) Design; (I-A) Seismic Design; and (II) Construction. Division I contains the following sections: (1) General Provisions; (2) General Features of Design; (3) Loads; (4) Foundations; (5) Retaining Walls; (6) Culverts; (7) Substructures; (8) Reinforced Concrete; (9) Prestressed Concrete; (10) Structural Steel; (11) Aluminum Design; (12) Soil-Corrugated Metal Structure Interaction Systems; (13) Timber Structures; (14) Elastomeric Bearings; (15) TFE (polytetrafluoroethylene) Bearing Surface; (16) Steel Tunnel Liner Plates; (17) Soil-Reinforced Concrete Structure Interaction Systems; and (18) Soil-Thermoplastic Pipe Interaction Systems. Division I-A contains the following sections: (1) Introduction; (2) Symbols and Definitions; (3) General Requirements; (4) Analysis and Design Requirements; (5) Analysis Methods; (6) Foundation and Abutment Design Requirements; (7) Structural Steel; and (8) Reinforced Concrete. A Commentary follows Division I-A. Division II contains the following sections: (1) Structure Excavation and Backfill; (2) Removal of Existing Structures; (3) Temporary Works; (4) Driven Foundation Piles; (5) Drilled Piles and Shafts; (6) Ground Anchors; (7) Earth Retaining Systems; (8) Concrete Structures; (9) Reinforcing Steel; (10) Prestressing; (11) Steel Structures; (12) Steel Grid Flooring; (13) Painting; (14) Stone Masonry; (15) Concrete Block and Brick Masonry; (16) Timber Structures; (17) Preservative Treatment of Wood; (18) Bearing Devices; (19) Bridge Deck Joint Seals; (20) Railings; (21) Waterproofing; (22) Slope Protection; (23) Miscellaneous Metal; (24) Pneumatically Applied Mortar; (25) Steel and Concrete Tunnel Liners; (26) Metal Culverts; (27) Concrete Culverts; and (28) Wearing Surfaces.

• Availability:
  • Find a library where document is available. Order URL: http://worldcat.org/isbn/1560510145
• Corporate Authors:

  American Association of State Highway and Transportation Officials (AASHTO)

  444 North Capitol Street, NW
  Washington, DC  United States  20001
• Publication Date: 1992

Language

• English

Media Info

• Features: Appendices; Figures; References; Tables;
• Pagination: 752 p.

Subject/Index Terms

• TRT Terms: Bridge construction; Bridge design; Bridges; Construction; Earthquake resistant design; Highway bridges; Specifications; Structural design
• Subject Areas: Bridges and other structures; Construction; Design; Highways; I24: Design of Bridges and Retaining Walls;

Filing Info

• Accession Number: 00626764
• Record Type: Publication
• ISBN: 1560510145
• Files: TRIS
• Created Date: Feb 8 1993 12:00AM