Feasibility Study of 3D Printing of Concrete for Transportation Infrastructure
Three-dimensional (3D) printing concrete technology has already been adopted for structural applications. Many houses and pedestrian bridges have been 3D printed in the United States and other countries. In spite of exploratory applications, 3D concrete printing technology remains fragmentary, and its full-scale uses in transportation infrastructure are still rarely seen. In order to bring the full benefits of this technology to the construction industry, it still requires a much better understanding of the relationships among digital design, operation/processing, mechanisms of building materials, formulation of printing materials, and performance of printed products. The present study aimed at exploring the feasibility of developing 3D printable concrete mixtures and evaluating their potential uses for transportation infrastructure. In this project, a commercial 3D clay printer was used to print small-scale clay, paste, and mortar objects. The effects of printing parameters and procedures, printable materials, and mix proportions on printing properties, such as flowability, extrudability, printability, buildability as well as on mechanical properties (compressive and tensile strength) of printed objects, were investigated. The methods for characterizing the quality of 3D printed objects were examined. The results indicate that paste and mortar mixtures made with cement, silica fume, a rapid-set grout powder, viscosity modifying agents (VMAs), and superplasticizer can be engineered to have desirable flowability, extrudability, printability, and buildability for 3D printing. Samples that were 3D printed with different printing paths and tested under different loading direction showed clear anisotropic behavior in their mechanical properties. Printing qualities, such as geometric accuracy, distortion, surface roughness, etc., of printed objects can be well evaluated using image analysis. In addition, a qualitative ranking system was also developed for evaluation of the printing qualities of 3D concrete printing.
- Record URL:
- Record URL:
- Record URL:
-
- Summary URL:
- Summary URL:
-
Corporate Authors:
Iowa State University, Ames
Institute for Transportation
Ames, IA United States 50010-8664Iowa Highway Research Board
800 Lincoln Way
Ames, IA United States 50010Iowa Department of Transportation
800 Lincoln Way
Ames, IA United States 50010 -
Authors:
- Wang, Kejin
-
0000-0002-7466-3451
- Wi, Kwangwoo
-
0000-0001-9415-3187
- Laflamme, Simon
-
0000-0001-5666-3215
- Sritharan, Sri
-
0000-0001-9941-8156
- Taylor, Peter
-
0000-0002-4030-1727
- Qin, Hantang
-
0000-0003-4180-7911
- Publication Date: 2020-9
Language
- English
Media Info
- Media Type: Digital/other
- Edition: Final Report
- Features: Figures; Photos; References; Tables;
- Pagination: 72p
Subject/Index Terms
- TRT Terms: Admixtures; Concrete; Mechanical properties; Three dimensional printing
- Subject Areas: Highways; Materials; Pavements;
Filing Info
- Accession Number: 01837680
- Record Type: Publication
- Report/Paper Numbers: IHRB Project TR-756, IHRB Project TR-756
- Files: TRIS, ATRI, STATEDOT
- Created Date: Feb 28 2022 9:40AM