Design of subsea cables/umbilicals for in-service abrasion - Part 2: Mechanisms

This paper is the second of two companion papers about the design of subsea cables/umbilicals for in-service abrasion. Several case studies of severe abrasion of submarine cables/umbilicals and corrective measures undertaken have been documented and presented in the first paper (Part I: Case Studies). The mechanisms of failure due to abrasion are explained in this paper. The effect of repeated lateral movement on LLDPE (linear low-density polyethylene) extruded outer sheaths of two cable samples was investigated. In the first test, a cable sample was displaced the equivalent of 12 km over a crushed mineral aggregate while in the second test, a cable was subjected to 3 km of displacement under conditions that replicated the touchdown point of a dynamic cable. The results of the first test indicated that the overall abrasion was low and acceptable. In the second test however, the outer sheath was completely worn through. The authors recommend the thickness of the outer sheath be increased for cables where uniform abrasion is expected, and high abrasion protection units be employed where localized abrasion is expected. Empirical data is provided to support these recommendations.

Language

  • English

Media Info

Subject/Index Terms

Filing Info

  • Accession Number: 01774720
  • Record Type: Publication
  • Files: TRIS
  • Created Date: Jun 22 2021 2:26PM