Diesel Oxidation Catalysts with Ultra-Low NO2 Emissions Supported by Nano-Washcoat on Sintered Metal Fibers

Diesel oxidation catalysts with ultra-low NO2 emissions have been developed based on palladium-tungsten (Pd-W). The catalysts are supported by aluminum-yttrium oxides (Al2O3-Y2O3) nano-washcoat on sintered metal fibers. Elemental composition analysis was performed using Energy Dispersive Spectroscopy (EDS) to quantify the distribution of the Al2O3-Y2O3 nano-washcoats and Pd-W catalysts on the surface of the metal fibers. Initially, emissions measurements were conducted to evaluate the performance of Pd-W catalysts using small coated samples of sintered metal fibers. The results show that the catalysts selectively oxidize CO into CO2 and reduce NO2 into NO, resulting in over 90% reduction in CO emissions and up to 85% reduction in NO2 emissions. Scale-up of an Active Diesel Particulate Filter (ADPF) was then tested on a Cummins 5.9L ISB diesel engine using the US-FTP transient test cycle and the ISO 8178 8-mode test cycle. The results of both test cycles yielded similar emissions reductions of 54% and 57% in CO, 84% and 81% in HC, 95% and 91% in PM, for the US-FTP and 8-mode test cycles, respectively. Both test cycles result in 100% reduction in NO2. In conclusion, the results of this study show that the application of the new Pd-W catalysts can lead to new generation of ADPFs with ultra-low NO2 emission, which are suitable for some applications such as school buses and underground mining equipment.


  • English

Media Info

Subject/Index Terms

Filing Info

  • Accession Number: 01677082
  • Record Type: Publication
  • Source Agency: SAE International
  • Report/Paper Numbers: 2017-01-0928
  • Files: TRIS, SAE
  • Created Date: Jul 30 2018 5:04PM