Evaluation of Mix Design Methods for Reclaimed Asphalt Pavement Mixes with Foamed Bitumen

The main objective of this work is to evaluate the use of two mix design procedures for designing bituminous pavement mixes with foamed bitumen. Mix design was carried out following the South African and Caltrans (California Department of Transportation) guidelines. The RAP materials used for mix design were collected from the NH-5, Chennai-Tada section. Using foamed bitumen produced from Wirtgen WLB 10 foaming equipment, a mix with RAP material, virgin aggregate and active filler were produced in the pug mill mixer. Marshall compaction effort was used for fabricating the samples. Using the indirect tensile strength test on dry and wet specimens, the optimum binder content was determined. It was seen that the two mix design procedure adopted showed different mix constituents despite using the same RAP source.

Language

  • English

Media Info

Subject/Index Terms

Filing Info

  • Accession Number: 01502159
  • Record Type: Publication
  • Files: TRIS
  • Created Date: Dec 23 2013 10:38AM